turkmavzeri Posted April 22, 2013 Share Posted April 22, 2013 Hi everybody, Last week i bougth Corsair H80i cooler, and i use latest firmware and corsair link software (f: v1.05 - soft: 2.3.4816). The software show fixed pump noise: like 2175rpm(with 2 rpm divider). We can change fan speeds but not able to change pump speed. My cpu run in 32degree, and it not need high pump speed because a little pump noise it generates(with a quiet pc). How we change pump speed with corsair software or corsair publish new software about that? Thanks Link to comment Share on other sites More sharing options...
wytnyt Posted April 22, 2013 Share Posted April 22, 2013 you cant,the speed is set for best conditions and performance Link to comment Share on other sites More sharing options...
Bryman Posted April 22, 2013 Share Posted April 22, 2013 you cAntec. and most of the noise is probably coming from the fans not the pump ok wtf apperantly i typed you cAntec. and it changed it to you cAntec. LOL i dont know how to fix it...oh well CAntec. C A N T . . . typing cant and three "." after it does not work apperantly :( cAntec cant. hmm actually just takes 2 "."...weird Link to comment Share on other sites More sharing options...
turkmavzeri Posted April 23, 2013 Author Share Posted April 23, 2013 http://www.pcper.com/files/review/2013-01-06/02-electronics-plate-naked.jpg and so anyone know any pump controller chip exist in above cooler board? I think if a pump speed controller exist like fan rpm controller, new link software may use it? Link to comment Share on other sites More sharing options...
Bryman Posted April 23, 2013 Share Posted April 23, 2013 you cant,the speed is set for best conditions and performance I highly recommend not changing the pump speed could cause some major problems Link to comment Share on other sites More sharing options...
ccaution Posted April 24, 2013 Share Posted April 24, 2013 ^ this. Those pumps that can run on various speeds (d5 varo & such) are designed to do so ;) Link to comment Share on other sites More sharing options...
Corsair Employees COOL GUY Posted April 24, 2013 Corsair Employees Share Posted April 24, 2013 The only way to change the pump speed at this time is through voltage. This will also effect all other systems connected to the pump head and is not advised. A future update of the software will not give you pump speed control of the H80i or H100i. Link to comment Share on other sites More sharing options...
turkmavzeri Posted April 25, 2013 Author Share Posted April 25, 2013 i understand you but i think that in idle desktop mode the pc-cpu heat is between 30-40 degree and i control all fans with ASUS AIsuite and so it is very quiet pc, but pump motor have a little whistling. The software can control pump speed automaticaly with reference of cpu temperature and it will become safe :D The power supply not a 3 or 4 pin, it is sata power and I'm not want insert a resistance on the power line. http://www3.picturepush.com/photo/a/12054621/img/RIVE-Build/1-Attach-H80i-HeatSink1.jpg good desing and software but one missing feature! And the latest, Corsair will sell new cpu water cooling with fan and pump control feature. Link to comment Share on other sites More sharing options...
Bryman Posted April 25, 2013 Share Posted April 25, 2013 The thing is the pump doesn't even support pump variation speeds... So even if a later version of link came out you would need to get a new pump... Sorry but its highly not recommended to change pump speed it could kill the pump or even make it louder Link to comment Share on other sites More sharing options...
gyrocoptic Posted December 20, 2014 Share Posted December 20, 2014 I have been operating my Corsair H80i CoolIT pump at variable speed for over two years now. Never any problem with it at all. While the pump is the quietest I have heard even running at a full ~2200 rpm it still produces a high pitched whine which I found annoying in my HTPC setup. Since I have used SpeedFan for fan control for years, I just modified the pump header to run its power and rpm leads to a MB PWM header. I have the pump set to drop down to ~450 rpm at idle and ramp up as the load demands. After replacing the stock H80i fans (or sirens) with a Noctua PWM fan the whole rig is silent at idle and VERY quiet even at full load transcoding video at 4.6 GHz. Perhaps this is illegal or immoral but it has given me two years and counting of faultless performance and I have not reason to believe that it won't continue. The CoolIT pump is a centifugal design and, as such, operates much like a fan. This PWM fan just pumps water rather than air. While it no doubt looses volumetric efficiency at low rpm the H80i system is so efficient that it is of no consequence. Link to comment Share on other sites More sharing options...
wytnyt Posted December 20, 2014 Share Posted December 20, 2014 any spinning apparatus has a sweet spot where efficiency and durability co-exist and going out of this sweet spot can produce many side effects,in the case of lowering a hydros designed rpm which can affect longevity,,cooling ability,noise level among others. there will be mixed results among users when changing rpm's but in the end for all,lifespan is reduced... Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Dustin Posted December 22, 2014 Corsair Employees Share Posted December 22, 2014 Do. NOT. Run the H80i at anything less than full speed, let alone any kind of variable speed. It was designed this way for a reason. Link to comment Share on other sites More sharing options...
sblantipodi Posted October 5, 2015 Share Posted October 5, 2015 Do. NOT. Run the H80i at anything less than full speed, let alone any kind of variable speed. It was designed this way for a reason. What about H80i GT? H80i GT can modulate the pump speed from 1800rpm to 3000rpm. Can I do it via motherboard with something like Asus qfan? Pump at 3000rpm is too loud for my taste. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Dustin Posted October 6, 2015 Corsair Employees Share Posted October 6, 2015 With the H80i GT, you can only change the pump speed through Corsair Link. The header the H80i GT is connected to MUST receive the full 12V, otherwise the pump and fans can behave erratically as they're not being fed enough power. Link to comment Share on other sites More sharing options...
sblantipodi Posted October 6, 2015 Share Posted October 6, 2015 With the H80i GT, you can only change the pump speed through Corsair Link. The header the H80i GT is connected to MUST receive the full 12V, otherwise the pump and fans can behave erratically as they're not being fed enough power. Let's talk clearly. A pump works like a fan and there is no reason to discuss on this. I can admit that some pump may stop if not fed with enough voltage, like a fan. What is the voltage that corsairink software gives to the pump when on quiet mode? If I know that voltage I can do something to change the pump speed without the link software and get the pump quiet when surfing the web and at full speed when doing some more CPU intensive Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Dustin Posted October 6, 2015 Corsair Employees Share Posted October 6, 2015 The problem is that the header the H80i GT is connected to is powering the pump *and* the fans. The pump is only designed and warranted to run in the Quiet or Performance modes specified in the Corsair Link software and it's not designed to vary. Link to comment Share on other sites More sharing options...
sblantipodi Posted October 6, 2015 Share Posted October 6, 2015 When will you design a smarter product? I'm really disappointed from this aio. In quiet mode performance are really bad, in performance mode the pump sounds like a refridgerator. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Dustin Posted October 7, 2015 Corsair Employees Share Posted October 7, 2015 Last generation's H80i and H100i were a whole mess of cables. For this generation we tried to simplify it by powering everything off of the fan header and then using Link for finer control. I'm sorry the product we designed doesn't work exactly like you - you specifically - want it and therefore is a stupid design. Link to comment Share on other sites More sharing options...
sblantipodi Posted October 7, 2015 Share Posted October 7, 2015 Last generation's H80i and H100i were a whole mess of cables. For this generation we tried to simplify it by powering everything off of the fan header and then using Link for finer control. I'm sorry the product we designed doesn't work exactly like you - you specifically - want it and therefore is a stupid design. I really appreciate your products and your excellent service, I'm sorry for the rude comments. Hope to see a more flexible pump in the feature, something that can switch from quiet to performance base on cpu temperature. In any case, thanks for your answers. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Dustin Posted October 8, 2015 Corsair Employees Share Posted October 8, 2015 That's something we can definitely look into. Truth be told there are a lot of changes and improvements we want to incorporate into the next generation of coolers; the GT(X) coolers are powerful, but feature set still isn't quite where we'd like it. Next generation is still quite a ways out, though. Link to comment Share on other sites More sharing options...
sblantipodi Posted October 8, 2015 Share Posted October 8, 2015 That's something we can definitely look into. Truth be told there are a lot of changes and improvements we want to incorporate into the next generation of coolers; the GT(X) coolers are powerful, but feature set still isn't quite where we'd like it. Next generation is still quite a ways out, though. thanks for the answer. Link to comment Share on other sites More sharing options...
drop24 Posted April 24, 2016 Share Posted April 24, 2016 The problem is that the header the H80i GT is connected to is powering the pump *and* the fans. The pump is only designed and warranted to run in the Quiet or Performance modes specified in the Corsair Link software and it's not designed to vary. If I run my rad fans (non-Corsair) off a different header can I have the pump be variable safely? Like run the fans of the CPU Fan header in PWM and run the pump of a System Fan header in DC mode? Link to comment Share on other sites More sharing options...
sblantipodi Posted April 25, 2016 Share Posted April 25, 2016 If I run my rad fans (non-Corsair) off a different header can I have the pump be variable safely? Like run the fans of the CPU Fan header in PWM and run the pump of a System Fan header in DC mode? you can do it with corsair link. pump can't be regulated by the fan header but only with corsair link. with corsair link you can set two speed, normal speed and maximum speed. to achieve this, you need to set the maximum power on the fan header and than regulate the pump speed with corsair link. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.