pitbrawlzant Posted May 29, 2012 Share Posted May 29, 2012 I have been building a custom PC and my H80 stopped working. Only one fan turns on on start-up, and is barely spinning. I have tried a few methods for resetting it, and none have worked. Any ideas? Link to comment Share on other sites More sharing options...
Toasted Posted May 29, 2012 Share Posted May 29, 2012 -Check the Molex connector -Have you tried switching the 3-pin connector on the port? Does it do the same thing with the other fan? Link to comment Share on other sites More sharing options...
pitbrawlzant Posted May 29, 2012 Author Share Posted May 29, 2012 Yeah, I connected it to the other molex connector I have,that is working, and its the port because when I switch which fan is in which port, they swap. Link to comment Share on other sites More sharing options...
Toasted Posted May 30, 2012 Share Posted May 30, 2012 Contact your reseller and see if he/she would be happy to replace the unit. If not, Request an RMA. If you have a fan controller, You can plug the fans there and control it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.