rbulha Posted April 11, 2011 Share Posted April 11, 2011 Hi everyone, I've follow the forum rules using the search, but I believe this exactly combination mobo + (2x4Gb) isn't listed here. This memory part number is listed in the QVL, at least the 1Gb model. I don't wana to overclock it. I'm just want stability. But using the default configuration I have at least one blue-screen per day. Here my BIOS config and a print of the CPU-Z https://picasaweb.google.com/lh/photo/NVFOwb9wHl6d6-6s5Hg_oQ?feat=directlink https://picasaweb.google.com/lh/photo/vJf0Ske0PJRcEJ1r32xyeQ?feat=directlink I would like some help in setting up this memory, what should I change? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted April 11, 2011 Corsair Employee Share Posted April 11, 2011 I would try and increase the TRFC to 78-84 and see if that helps. Other wise try and lower the frequency to DDR1066. Link to comment Share on other sites More sharing options...
rbulha Posted April 12, 2011 Author Share Posted April 12, 2011 I would try and increase the TRFC to 78-84 and see if that helps. Other wise try and lower the frequency to DDR1066. Thanks for the advice RAM GUY, but yesterday i've increased the memory voltage to 1.52V and I've run a day without any blue-screen. I don't know if it was some coincidence, but looking on W7 Memory resource manager the hardware fault rate was decreased. Before the voltage change this rate was always high. This make any sense? Link to comment Share on other sites More sharing options...
rbulha Posted April 13, 2011 Author Share Posted April 13, 2011 :biggrin: Another day with no blue screen at all. Any chance to damage the module using 1.52V? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted April 13, 2011 Corsair Employee Share Posted April 13, 2011 It would not be a problem up to about 1.7 Volts on that MB. Link to comment Share on other sites More sharing options...
rbulha Posted April 17, 2011 Author Share Posted April 17, 2011 Just for feedback, I'm running for a week with no issues. The 1.52V worked just fine. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted April 18, 2011 Corsair Employee Share Posted April 18, 2011 No worries sounds like you are good to go! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.