Smascher Posted March 16, 2021 Share Posted March 16, 2021 Hallo, Ich besitze eine 3080 Asus Strix mit einen Alphacool Kühlkörper, ist es möglich diesen Kühlkörper an den Commander Pro anzuschließen so das man die LED´s des Kühlers steuern kann über die ICUE Software. Ansich ist es ja nur eine LED Stripe Hier der link zum Kühler https://www.alphacool.com/shop/grafikkarten-wasserkuehler/nvidia-fullsize/27989/alphacool-eisblock-aurora-acryl-gpx-n-rtx-3090/3080-rog-strix-mit-backplate Link to comment Share on other sites More sharing options...
Smascher Posted March 16, 2021 Author Share Posted March 16, 2021 So konnte nicht warten... da kommt das Basteln wieder durch, nach der Arbeit gleich getestet und es Funktioniert. Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted March 16, 2021 Corsair Employee Share Posted March 16, 2021 Was hast du in iCUE gewählt, um die LEDs anzusteuern? Link to comment Share on other sites More sharing options...
Smascher Posted March 17, 2021 Author Share Posted March 17, 2021 (edited) Der Kühler liegt bei mir auf Kanal 2 und dort habe ich den ersten LED 250mm ausgewählt. Der Kühler besitzt 14 LED und 15 gibt ICUE vor somit läuft es Perfekt. und die ICUE v4 läuft auch TOP Edit: Ich bin ja nur auf die Idee gekommen, weil man bei ICUE nicht auf den 5V RGB Connector zugreifen kann sondern nur auf die 12V beim Asus Mainboard. Edited March 17, 2021 by Smascher Link to comment Share on other sites More sharing options...
muvo Posted March 17, 2021 Share Posted March 17, 2021 (edited) Super das es bei dir funktioniert, und gut zu wissen falls einer eine ähnliche Idee hat Edited March 17, 2021 by muvo Link to comment Share on other sites More sharing options...
Smascher Posted March 17, 2021 Author Share Posted March 17, 2021 So könnte man sich auch eigene aRGB Stripes legen im Gehäuse da ist vieles möglich. Hab da schon eine Idee wieder^^ Link to comment Share on other sites More sharing options...
muvo Posted March 17, 2021 Share Posted March 17, 2021 Sie corsair led Streifen sollen gut sein ;-) Link to comment Share on other sites More sharing options...
Smascher Posted March 18, 2021 Author Share Posted March 18, 2021 Da sind zu wenige drauf die bestückung müsste viel mehr sein. Link to comment Share on other sites More sharing options...
muvo Posted March 18, 2021 Share Posted March 18, 2021 Stimmt eine 2 m Band oder ähnliches ware genial Link to comment Share on other sites More sharing options...
Smascher Posted March 20, 2021 Author Share Posted March 20, 2021 So bis jetzt lief der Test sehr gut mir den Custom Led Stripe Link to comment Share on other sites More sharing options...
muvo Posted March 22, 2021 Share Posted March 22, 2021 Sie gut aus Link to comment Share on other sites More sharing options...
Smascher Posted March 28, 2021 Author Share Posted March 28, 2021 (edited) Zum glück hat man ja mal Sonntag frei, so das Basteln ist erstmal Fertig. Edited March 28, 2021 by Smascher 1 Link to comment Share on other sites More sharing options...
muvo Posted March 28, 2021 Share Posted March 28, 2021 Super pc ! Link to comment Share on other sites More sharing options...
cpheraicse Posted February 1, 2022 Share Posted February 1, 2022 Hi, könntest du bitte ein Foto machen wie du die Beiden Artikel angeschlossen hast? ich habe selber nen alphacool gpu block, habe nun den stecker modifiziert und ausprobiert , jedoch funktioniert es bei mir leider nicht. Link to comment Share on other sites More sharing options...
muvo Posted February 3, 2022 Share Posted February 3, 2022 Oder mach von deinem System Bilder und @Corsair Marcus kann dir weiterhelfen Link to comment Share on other sites More sharing options...
Oli1988 Posted January 5, 2023 Share Posted January 5, 2023 Hi, ich habe ebenfalls eine alphacool gpu Block und würde mich sehr über die Lösung freuen. Gibt es ein Adapterkabel oder muss ich umlöten??? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now