Jump to content
Corsair Community

24 pin atx on ax1000


Gphish
 Share

Recommended Posts

im looking at the back of the supply the 24 pin atx is only 18 slots on it then next to it is a 10 pin slot how do you connect the 24 pin cable? also does it matter which pcie 6 pin to connect the cpu power supply i use?
Link to comment
Share on other sites

The 2x12 ATX power cable is slit at the PSU end, so it is marked where to connect the two ends.

 

The 12V power plugs on the right are suitable for the EPS12V and PCIe power cables. You have a total of 6 to work with.

 

 

-CP-9020152-NA-Gallery-AX1000-05.png

Link to comment
Share on other sites

  • Corsair Employees
im looking at the back of the supply the 24 pin atx is only 18 slots on it then next to it is a 10 pin slot how do you connect the 24 pin cable? also does it matter which pcie 6 pin to connect the cpu power supply i use?

 

The 24-pin connector is the motherboard end. Please utilized the QSG that was included with your PSU for how to connect the cables to the PSU. Only one end will fit in the PSU and the other in the hardware end. If you have to force anything you are either trying to plug the wrong connector together or have the cables turned around.

Link to comment
Share on other sites

 Share

×
×
  • Create New...