Jump to content

Gphish

Members
  • Posts

    25
  • Joined

Everything posted by Gphish

  1. I have had my Corsair Dominator Platinum Airflow RGB LED Memory Fan Cooling CMDAF2 for at least 4 years. My question is have there been an update on this model recently or since it originally became available? I want to connect them to a commander pro to set the lighting. What does it show up under in ICUE?
  2. My set up is 3 LL120's and 2 LL140's and 2 Corsair Dominator Platinum Airflow RGB LED Memory Fan Cooling CMDAF2 because I have dual Dimms on my M/B. I know the commander can take up to 6 fans but i have a total of 7 . How would I do my setup to be able to independently control the fan speeds and the RGB lighting on all 7 fans or at least the 2 Memory Fans on one channel that i can control the lighting and fan speeds Also I am interested in the LED strip lights. Do I get the Corsair RGB LED Lighting PRO Expansion Kit (CL-8930002) or is there something else i need to buy for the led strip lights to work. So If someone is kind enough to let me know how to do this and what to buy I would be very grateful.
  3. im looking at the back of the supply the 24 pin atx is only 18 slots on it then next to it is a 10 pin slot how do you connect the 24 pin cable? also does it matter which pcie 6 pin to connect the cpu power supply i use?
  4. https://www.guru3d.com/files-details/corsair-utility-engine-download.html It worked for me. I created profile then on the right side there will be 3 lines and select that then there is a option to save to device it looks like a SD Card your mouse may not show up but with the software open unplug your mouse then plug it back in. I had to do that then it saw it. make profile then select the save to device option. let me know if that worked
  5. I got it to work with v2.24.50 of the CUE software. lighting and dpi saved to device. I knew it could be done because I did it before. I have uninstalled this disappointing software and will never use it again. Thank you for your help c-attack
  6. I did update from the settings menu and it downloaded and installed this version 3.27.68 and I verified latest firmware for the mouse. The screen shot to save to hardware is a screen shot tech support sent to me and should be the one I get. My screen shot doesn't give that option. The new screen shot does show the sd card looking save option to the right of the profile and my mouse is on it. It is greyed out and cannot select it. also you can see in screen shot 2 that there is a sd card looking save option on the profile and the mouse is on it. when I click on it it doesn't do anything like its not a selectable option. Anyway you can make a video or instructions to save to device with new version? Maybe a YouTube video because there is not one on there that shows the new version way to save to device.
  7. I am having same issue but with M65 PRO RGB mouse. I cannot save profile to device.
  8. Icue current version 3.10.125 and m65 firmware 3.06. I cannot get a save to device option when I add a new profile. see screen shot. number 1 . it should look like the other image. Can anyone help me? I have been able to save profile to mouse before in last version but that to didn't have the same add to hardware option either. I don't remember how I did it. something to the fact I created a new profile and I was able to click on the sd card looking icon on the right hand side of profile list. When I try to do it it highlights yellow then back but doesn't save profile to device.
×
×
  • Create New...