BigVik Posted November 25, 2018 Share Posted November 25, 2018 I recently bought another LL120 fan to use with my existing 3 fans and lighting node pro but the new fan just light up half of the LED's and is just white, i cant control it with either corsair link or ICUE Link to comment Share on other sites More sharing options...
DevBiker Posted November 25, 2018 Share Posted November 25, 2018 Can you show us the iCUE configuration screen? And provide some system info (Click "Edit System Specs" above.) Link to comment Share on other sites More sharing options...
BigVik Posted November 25, 2018 Author Share Posted November 25, 2018 Windows 10 64bit CPU i7-6700k @ 4.00 Ghz Motherboard: Asus Z170-A Ram: 32gb ddr4 GPU: Gtx 1080 Ti Also the other fans ONLY work in the slots on the lighting node where they were first installed, i.e i cannot switch places of 2 working fans Link to comment Share on other sites More sharing options...
BigVik Posted November 25, 2018 Author Share Posted November 25, 2018 Link to comment Share on other sites More sharing options...
DevBiker Posted November 25, 2018 Share Posted November 25, 2018 That's quite odd. As long as you don't skip port, you should be able to rearrange them as you like. Does the new fan work at all in, say, port 1? Link to comment Share on other sites More sharing options...
BigVik Posted November 25, 2018 Author Share Posted November 25, 2018 (edited) No change what so ever on the new fan depending on port, just half of the LED's work and its just white and the old fans don't turn on at all in the "wrong" ports Edited November 25, 2018 by BigVik Link to comment Share on other sites More sharing options...
DevBiker Posted November 26, 2018 Share Posted November 26, 2018 No change what so ever on the new fan depending on port, just half of the LED's work and its just white and the old fans don't turn on at all in the "wrong" ports So it would seem that fan is bad. When you say you put the fans in the "wrong" port, you are switching them between 1, 2, and 3, correct? If you skip a port, they won't work. Link to comment Share on other sites More sharing options...
BigVik Posted December 7, 2018 Author Share Posted December 7, 2018 Yep, fan was busted! Link to comment Share on other sites More sharing options...
Recommended Posts