naughtybynature Posted January 9, 2017 Share Posted January 9, 2017 Hey, I have the same problem with macro execution not being available (scimitar) as someone else already mentioned, but cant manage to fix it, I have done all the things you mentioned in your guide. This thing happened after I used CHKDSK earlier today, any idea how to fix this? Link to comment Share on other sites More sharing options...
Inheritance Posted January 9, 2017 Author Share Posted January 9, 2017 Hey, I have the same problem with macro execution not being available (scimitar) as someone else already mentioned, but cant manage to fix it, I have done all the things you mentioned in your guide. This thing happened after I used CHKDSK earlier today, any idea how to fix this? That all i got, try contacting Corsair Support. I won't have anything more solid till CES is over and everything is back up and running at Corsair. Link to comment Share on other sites More sharing options...
Braxos Posted January 17, 2017 Share Posted January 17, 2017 Hello Just a question any idea how i could make my k95 rgb to switch off the lighting if the Caps Lock is pressed? is it even possible to do that ? Thanks Link to comment Share on other sites More sharing options...
Inheritance Posted January 17, 2017 Author Share Posted January 17, 2017 Hello Just a question any idea how i could make my k95 rgb to switch off the lighting if the Caps Lock is pressed? is it even possible to do that ? Thanks you can rebind the capslock so it changes to a blank profile but you will loose the function of the caps lock. Link to comment Share on other sites More sharing options...
razear123 Posted February 5, 2017 Share Posted February 5, 2017 can i use that firmware for K65 RGB Rapidfire? Link to comment Share on other sites More sharing options...
Comet 1626864951 Posted February 6, 2017 Share Posted February 6, 2017 Inheritance: Define CAPS LOCK to switch to a profile where the lighting is all off, and define each key to act as though CAPS is pressed. In this second profile, define CAPS LOCK to switch back to your default profile. This way you do not lose the function of the CAPS LOCK key. Link to comment Share on other sites More sharing options...
Inheritance Posted February 6, 2017 Author Share Posted February 6, 2017 Inheritance: Define CAPS LOCK to switch to a profile where the lighting is all off' date=' and define each key to act as though CAPS is pressed. In this second profile, define CAPS LOCK to switch back to your default profile. This way you do not lose the function of the CAPS LOCK key.[/quote'] Ummmm, not sure how one would define a key as a caps A. but yea if you could that could be a work around. Link to comment Share on other sites More sharing options...
JZA70twntrbo Posted February 8, 2017 Share Posted February 8, 2017 So I just connected my K95 and Scimitar Pro through the Lapdog and using the newest version of CUE, but every time I start CUE it says the profiles didn't save and have to be reloaded. And everytime I hit update the app says there was an error when trying to update. Also, while the app is running, the keyboard will not switch over to M2 or M3. Is there any way to fix that? I found all the previous versions of CUE 2 and downloaded them just in case one is the most functional version. I bought the keyboard and mouse so I can use them with the Lapdog lapdesk and wanted the peripherals to brand match. Link to comment Share on other sites More sharing options...
slugzkea Posted February 8, 2017 Share Posted February 8, 2017 (edited) This is how i fixed the issue with my m65: delete all custom profiles in utility engine uninstall utility engine install latest version import saved profile(s) Fixed. Edited February 8, 2017 by slugzkea Link to comment Share on other sites More sharing options...
bigbocah Posted February 8, 2017 Share Posted February 8, 2017 hello, my corsair rgb 95 is malfunction. today i use last cue 2.9.53 i can't update firmware 2.05 cause stack on 3% my spec is windows 7 sp1 motherboard asus PQ5 DELUXE intel quadcore Q6600 memory is corsair twin dominator 4gb my vga SAPPHIRE Radeon RX 460 NITRO 4GB casing dazoomba power suply corsair TX 750 i love corsair please help me Link to comment Share on other sites More sharing options...
bigbocah Posted February 8, 2017 Share Posted February 8, 2017 hello, my corsair rgb 95 is malfunction. today i use last cue 2.9.53 i can't update firmware 2.05 cause stack on 3% my spec is windows 7 sp1 motherboard asus PQ5 DELUXE intel quadcore Q6600 memory is corsair twin dominator 4gb my vga SAPPHIRE Radeon RX 460 NITRO 4GB casing dazoomba power suply corsair TX 750 i love corsair please help me all led is on when i close cue Link to comment Share on other sites More sharing options...
bigbocah Posted February 8, 2017 Share Posted February 8, 2017 all led is on when i close cue error is come when i open cue, like this no device detected Link to comment Share on other sites More sharing options...
Inheritance Posted February 8, 2017 Author Share Posted February 8, 2017 So I just connected my K95 and Scimitar Pro through the Lapdog and using the newest version of CUE, but every time I start CUE it says the profiles didn't save and have to be reloaded. And everytime I hit update the app says there was an error when trying to update. Also, while the app is running, the keyboard will not switch over to M2 or M3. Is there any way to fix that? I found all the previous versions of CUE 2 and downloaded them just in case one is the most functional version. I bought the keyboard and mouse so I can use them with the Lapdog lapdesk and wanted the peripherals to brand match. Try clearing out this folder. C:\Users\(Your User)\AppData\Roaming\Corsair\CUE Note it will delete all of your profiles and settings. The update function doesn't work yet. As for the M keys, I believe that's the way they're meant to function now because the mode/profile system was changed in CUE 2. If you want to use those keys you would have to use a Cue 1 build. hello, my corsair rgb 95 is malfunction. today i use last cue 2.9.53 i can't update firmware 2.05 cause stack on 3% my spec is windows 7 sp1 motherboard asus PQ5 DELUXE intel quadcore Q6600 memory is corsair twin dominator 4gb my vga SAPPHIRE Radeon RX 460 NITRO 4GB casing dazoomba power suply corsair TX 750 i love corsair please help me Unable to Update Firmware If your firmware update is stuck at 3% or doesn't work at all the the following 1. Use a different USB port or configuration. Remember if you are using USB 2.0 plug the one with the arrows in first followed by the one with the keyboard. 2. Try running CUE in compatibility mode 2. Make sure that if you use USB 3, use Intel port and not 3rd party vendor like ASmedia. 3. Go to your Corsair installation folder in program files; right click on the Corsair folder and select Properties 4. Then select the Security tab 5. Click on Edit button 6. Make sure that Users and also Trusted Installer has full control 7. Restart CUE and update firmware. Link to comment Share on other sites More sharing options...
bigbocah Posted February 11, 2017 Share Posted February 11, 2017 Unable to Update Firmware If your firmware update is stuck at 3% or doesn't work at all the the following 1. Use a different USB port or configuration. Remember if you are using USB 2.0 plug the one with the arrows in first followed by the one with the keyboard. 2. Try running CUE in compatibility mode 2. Make sure that if you use USB 3, use Intel port and not 3rd party vendor like ASmedia. 3. Go to your Corsair installation folder in program files; right click on the Corsair folder and select Properties 4. Then select the Security tab 5. Click on Edit button 6. Make sure that Users and also Trusted Installer has full control 7. Restart CUE and update firmware. still not work for me. when open cue device not detected Link to comment Share on other sites More sharing options...
Inheritance Posted February 11, 2017 Author Share Posted February 11, 2017 still not work for me. when open cue device not detected set the keyboard into bios mode with the switch in the back. Does it work? Link to comment Share on other sites More sharing options...
bigbocah Posted February 12, 2017 Share Posted February 12, 2017 set the keyboard into bios mode with the switch in the back. Does it work? still device not deteted.. any way please Link to comment Share on other sites More sharing options...
Inheritance Posted February 13, 2017 Author Share Posted February 13, 2017 still device not deteted.. any way please hum, you would be best off contacting Corsair Support. They would be better equipped to help you. I mostly deal with common issues, so this is a little out of my field. Link to comment Share on other sites More sharing options...
bigbocah Posted February 13, 2017 Share Posted February 13, 2017 hum, you would be best off contacting Corsair Support. They would be better equipped to help you. I mostly deal with common issues, so this is a little out of my field. i try reinstall cue, rgb led is work but only for 5-10 second, always. still can't update firmware . when i open cue, keyboard will not detected Link to comment Share on other sites More sharing options...
texmaster Posted March 2, 2017 Share Posted March 2, 2017 (edited) I can't get the CUE to work with the 800 mousepad and when I uninstalled and reinstalled my k95 Platinum has only a handful of lighting options and none of them work. The only way I can get it to work is to exit out of cue and I at least have my 3 saved ones. The mousepad just has the random glow going. Is there a way to manually remove the drivers so I can try a fresh install? Edited March 2, 2017 by texmaster Link to comment Share on other sites More sharing options...
Inheritance Posted March 2, 2017 Author Share Posted March 2, 2017 I can't get the CUE to work with the 800 mousepad and when I uninstalled and reinstalled my k95 Platinum has only a handful of lighting options and none of them work. The only way I can get it to work is to exit out of cue and I at least have my 3 saved ones. The mousepad just has the random glow going. Is there a way to manually remove the drivers so I can try a fresh install? yes, delete the files in your installation folder, Delete the C:\Users\zhere\AppData\Roaming\Corsair\CUE folder scan the registry for any entries with the word Corsair. Delete them all. Restart, Reinstall CUE. Link to comment Share on other sites More sharing options...
Comet 1626864951 Posted March 6, 2017 Share Posted March 6, 2017 Ummmm, not sure how one would define a key as a caps A. but yea if you could that could be a work around. You would define A to be a SHIFT+A; the caps-lock acts as if the shift key were held down. See the Tutorial: Switching Modes by Modifier Keys and Modifier Key Combos Link to comment Share on other sites More sharing options...
Inheritance Posted March 7, 2017 Author Share Posted March 7, 2017 You would define A to be a SHIFT+A; the caps-lock acts as if the shift key were held down. See the Tutorial: Switching Modes by Modifier Keys and Modifier Key Combos Ah yes, but while that would output a capital A, It's not the same as directly outputting the letter A. Also rebinding 40+ keys oh god lol. If a game accepted multiple inputs it would register a Shift + A combo instead of A. But it's a good solution. however, I heard Corsair has a better one coming ;): Link to comment Share on other sites More sharing options...
Comet 1626864951 Posted March 7, 2017 Share Posted March 7, 2017 (edited) Inheritance Cuddly Beta Nayn Cat Ah yes, but while that would output a capital A, It's not the same as directly outputting the letter A. Also rebinding 40+ keys oh god lol. If a game accepted multiple inputs it would register a Shift + A combo instead of A. But it's a good solution. however, I heard Corsair has a better one coming ;): Hello Inheritance, The Universal Serial Bus HID [Human Interface Device] Usage Tables, Version 1.12, 28 October 2014 in Chapter 10, Keyboard/Keypad Page (0x07), lists ALL the standard keycodes defined for a keyboard, and you can see that there is no single keycode for a shifted A character,as both uppercase "A" and lowercase "a" both send "usage id 4" from the keyboard to the host computer. (The footnote in this table indicates that usage id 4 is typically remapped to other letters if you are using a different language.) My post was describing exactly how to program a macro that could be bound that would send a SHIFT + A. This is not supposed to be the same as directly outputting the letter A. Depending on the application that is receiving the keyboard input, the computer might not "output a capital A"; it depends on what the application does when receiving an A while the shift key is held down, so if a game does something different for shifted A than unshifted A, the macro will work. I am not privy to Corsair's plans, but any better solution than SHIFT (keypress) A (keystroke) SHIFT (keyrelease) will be a UI or ease-of-use issue for the person wishing to program this functionality, and will not be "better" than the solution I gave, in terms of functionality, simply because to make a shifted A that will be recognized by a host computer, the keyboard must follow the standard. P.S. I see your tagline, "Cuddly Beta Nayn Cat." When you are production quality, will this become "Cuddly Nyan Cat?" Edited March 7, 2017 by Comet ☄ Link to comment Share on other sites More sharing options...
Inheritance Posted March 11, 2017 Author Share Posted March 11, 2017 My post was describing exactly how to program a macro that could be bound that would send a SHIFT + A. This is not supposed to be the same as directly outputting the letter A. Depending on the application that is receiving the keyboard input, the computer might not "output a capital A"; it depends on what the application does when receiving an A while the shift key is held down, so if a game does something different for shifted A than unshifted A, the macro will work. ddd I am not privy to Corsair's plans, but any better solution than SHIFT (keypress) A (keystroke) SHIFT (keyrelease) will be a UI or ease-of-use issue for the person wishing to program this functionality, and will not be "better" than the solution I gave, in terms of functionality, simply because to make a shifted A that will be recognized by a host computer, the keyboard must follow the standard. P.S. I see your tagline, "Cuddly Beta Nayn Cat." When you are production quality, will this become "Cuddly Nyan Cat?" I think they will be doing exactly what you said but in software and hidden so theres not a whole action chain to setup. Sure if CUE ever stops being developed lol Link to comment Share on other sites More sharing options...
genzopwns Posted March 19, 2017 Share Posted March 19, 2017 have a problem with my k70 rgb lux with brown switches. recently the keys that I use the most for gaming (WASD) seems to be sunk in. as I'm typing this, the white plastic part on my S key broke off and is now loose. I've only owned this since Christmas time and it's already showing signs of wear with random keys being higher or lower than the others. Is it like this or should I contact customer service about this? Link to comment Share on other sites More sharing options...
Recommended Posts