Dicehunter Posted June 16, 2019 Share Posted June 16, 2019 I ordered the 680X yesterday and have the H150i 360mm AIO, I pulled a blonde moment and forgot to check fully if it was compatible, Will it fit nicely in the front ? Link to comment Share on other sites More sharing options...
Waukeen Posted June 16, 2019 Share Posted June 16, 2019 Yes, the product page shows you what fits where too. 1 Link to comment Share on other sites More sharing options...
Dicehunter Posted June 17, 2019 Author Share Posted June 17, 2019 Yes, the product page shows you what fits where too. Actually didn't see that, Thanks for the info :): Link to comment Share on other sites More sharing options...
Waukeen Posted June 17, 2019 Share Posted June 17, 2019 NP, had to research cases recently and went with the same. One weak spot on it are the 3.5" bays and circulation, or lack there of. Ended up retiring a couple drives since they had been working happily for 9 years without a hiccup, but, the fact they were getting hotter with age was made brutally clear when one started sitting parked at 59°C. So just be aware that the cooling there sucks, otherwise great case. Link to comment Share on other sites More sharing options...
c-attack Posted June 17, 2019 Share Posted June 17, 2019 See also: http://forum.corsair.com/v3/showthread.php?t=186133 Watch out for long GPUs at 290mm or more. Watch out if combining multiple radiators. Link to comment Share on other sites More sharing options...
Waukeen Posted June 17, 2019 Share Posted June 17, 2019 (edited) So I actually have the case with an EVGA 2080Ti FTW3 Ultra Hybrid (wish the name was longer) and it will get a touch tight up front with a front mount rad but should be doable. If you go with the same card you will have about an inch of clearance between the leading edge of the card and the fans/rad. Push/pull is definitely out of the question though on the front seeing as the air cooled version of it is 302mm versus the 291mm of the hybrid. So just keep that in mind when you are planning on what goes where. Side note I see you play E:D Dice, guessing you joined the DW2 trip? Edited June 17, 2019 by Waukeen Link to comment Share on other sites More sharing options...
Dicehunter Posted June 19, 2019 Author Share Posted June 19, 2019 So I actually have the case with an EVGA 2080Ti FTW3 Ultra Hybrid (wish the name was longer) and it will get a touch tight up front with a front mount rad but should be doable. If you go with the same card you will have about an inch of clearance between the leading edge of the card and the fans/rad. Push/pull is definitely out of the question though on the front seeing as the air cooled version of it is 302mm versus the 291mm of the hybrid. So just keep that in mind when you are planning on what goes where. Side note I see you play E:D Dice, guessing you joined the DW2 trip? Sadly not, A busy work schedule has not allowed it, I'll undertake the trip on my own in a month or 2 when I have free time on my hands and have gotten my FSD engineered a little more :): Oh and just curious but are the light loop fans included in the front of the case the same exact LL fans you can buy separately ? Link to comment Share on other sites More sharing options...
DevBiker Posted June 19, 2019 Share Posted June 19, 2019 Oh and just curious but are the light loop fans included in the front of the case the same exact LL fans you can buy separately ? Yes, the standard edition, not the white "special edition". Link to comment Share on other sites More sharing options...
Dicehunter Posted June 19, 2019 Author Share Posted June 19, 2019 Yes, the standard edition, not the white "special edition". Cool thanks for the info. Link to comment Share on other sites More sharing options...
Jorn Buiter Posted July 15, 2019 Share Posted July 15, 2019 Thanks for cool suggestion. I'm going to buy same, as I have a project in mind. Link to comment Share on other sites More sharing options...
Waukeen Posted July 15, 2019 Share Posted July 15, 2019 Thanks for cool suggestion. I'm going to buy same, as I have a project in mind. Don't keep us in the dark, you better post some pics or I will be forced to put you in front of the Corsair firing squad AKA Doom Frag Team who prefer to do that instead of fix things :P Link to comment Share on other sites More sharing options...
Recommended Posts