The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Cooling (https://forum.corsair.com/forums/forumdisplay.php?f=155)
-   -   H80i v2 "no devices detected" on iCUE (https://forum.corsair.com/forums/showthread.php?t=180767)

miguecor 08-31-2018 05:50 AM

H80i v2 "no devices detected" on iCUE
 
Hi,

I'm trying to see my H80i v2 cooler in iCUE, but it's not showing. It was working once, and after that I just cannot seem to make it work again. I didn't do any change to the configurations. It just stopped working.

Things I already tried:

Uninstalling and Re-installing iCUE.
Removing Registry Keys
Disabling and Enabling device in Device Management

I can see the device in Corsair Link (4.9.7.35), but it says "controlled by iCUE".

Thanks in advance!

DevBiker 08-31-2018 09:35 AM

Have you tried restarting the iCue Service (there's a button under settings)?

Corsair Jam 08-31-2018 01:53 PM

Quote:

Originally Posted by DevBiker (Post 970877)
Have you tried restarting the iCue Service (there's a button under settings)?

If this doesn't work, attempt to run a repair on the installation as well. This can be accessed by running the installer again or going to "Apps & Features" in Windows 10.

miguecor 09-10-2018 09:23 PM

I have already tried both and it's now working. Still "no devices".

miguecor 09-10-2018 09:33 PM

I just noticed that my H850i PS is having the same issue.

DevBiker 09-10-2018 09:34 PM

Take a look in Device Manager ... do you see Corsair USBXp Driver in there? If so, is there any indication of it failing?

Also, look at section "B" of the Liquid Cooler FAQ (linked in my signature) and make sure that the pump is powered properly.

OCtransplant 11-13-2019 05:31 PM

Sorry to rehash this old thread, but I'm having the same issue and was wondering if the OP was able to fix the problem. Corsair Link is recognizing the H80i but it's not showing up in iCue. I'm also using the Commander Pro and have the USB cable that comes off the bottom of the pump connected to the USB port on the Commander Pro. Both fans are connected to each other with the provided cable and plugged into a single "CPU_FAN" header.


All times are GMT -4. The time now is 03:04 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.