Ryukin2 Posted February 8, 2019 Share Posted February 8, 2019 Hi All, I'm building a new PC and i'll be using the CORSAIR SPEC OMEGA RGB as my case. One of the things which i am worried about is i will be cooling my cpu with the CORSAIR Hydro H100i Addressable RGB PLATINUM. I've noticed the case uses the HD120mm where as the cooler uses ML Pro RGB fans. I am just wondering if these two fans can sync, also will a separate controller be required? As much information as possible would be greatly appreciated. Cheers, Dan :) Link to comment Share on other sites More sharing options...
Zotty Posted February 8, 2019 Share Posted February 8, 2019 (edited) Hi Buddy. Have read of the Below linked thread. covers the Corsair RGB Ecosystem in detail including device specs and set up diagrams. http://forum.corsair.com/v3/showthread.php?t=173880 To be able to control the HD fan in iCUE and match its curves with your cooler you would need a Commander Pro.... the Spec Omega RGB comes with a Lighting Node Pro that is specific to that case.. unfortunately is doesn't control Fan speeds Edited February 8, 2019 by Zotty Link to comment Share on other sites More sharing options...
Ryukin2 Posted February 10, 2019 Author Share Posted February 10, 2019 I've now changed the H100i to a h115i. I can see that the coolers RBG can be controlled directly from the IQUE software without needing to be connected into the RGB header. Does this mean that my Spec Omega RGB and the HD fans included will still be in sync and just the Cooler will be out of sync. I'm just wondering as i do not mind so much if the RGB is in perfect harmony just if it is lit up haha. Link to comment Share on other sites More sharing options...
Zotty Posted February 10, 2019 Share Posted February 10, 2019 ICue will sync them buddy.. Both the case and the cooler are connected to iCue via usb.. Link to comment Share on other sites More sharing options...
Ryukin2 Posted February 10, 2019 Author Share Posted February 10, 2019 Okay, Great!! so there is no need for me to purchase a commander pro or anything additional apart from what i already have? Link to comment Share on other sites More sharing options...
Zotty Posted February 10, 2019 Share Posted February 10, 2019 you would only need a commnder pro if you wanted to control the speed of your case fans in icue buddy... the HD fan without the commander pro would have to be controlled by your motherboards fan control... Link to comment Share on other sites More sharing options...
Ryukin2 Posted February 10, 2019 Author Share Posted February 10, 2019 Okay, I'm not even more confused now haha. So if i don't want to control fan speed, then the current setup will be fine? Link to comment Share on other sites More sharing options...
Zotty Posted February 10, 2019 Share Posted February 10, 2019 Yes mate.. Will be able to sync your Corsair Rgb :) Link to comment Share on other sites More sharing options...
Ryukin2 Posted February 10, 2019 Author Share Posted February 10, 2019 Great, Thank you. I'm new to the whole RGB world!! (if you can't tell) Thanks again for your amazing advice Link to comment Share on other sites More sharing options...
Zotty Posted February 10, 2019 Share Posted February 10, 2019 No worries man... good luck on your quest :).. make sure you post some pictures Link to comment Share on other sites More sharing options...
DarknessDemon Posted May 7, 2020 Share Posted May 7, 2020 Hi everyone :D I want to change my pc case and coller so i have a few questions. I bought corsair ICUE 220T RGB Black case with glass front panel. Case have 3x SP120 RGB PRO, i will buy one more SP120 RGB PRO to the back and want to buy Corsair Hydro Series H100i Platinum RGB. H100i have 2x CORSAIR ML PRO Series RGB, can i sync sp120 fans and ml pro rgb fans? I have only corsair fan hub. Or should I buy 2 more sp120 and put it on h100i platinum? Thanks for replay and sorry for my english :) Link to comment Share on other sites More sharing options...
Recommended Posts