DemonRoxas Posted April 1, 2018 Share Posted April 1, 2018 I have a profile where the visual effects are composited of several layers, all of them timed to execute every 3sec in sync with each other. For example, there are two seperate Wave effects (one pink and one orange) crossing my Strafe RGB keyboard at the same time, overlapping one another to create "crosses". In the old CUE2, it was always in sync every 3sec, but now in iCUE it desynchronizes after ~15-20min. How it was on CUE2 / it's intended to be: How it becomes after several minutes in iCUE: Same thing with my Lighting Node PRO RGB LED strips and the SP120 RGB fans, the Ripple layers are to be executed every 3sec in sync with one another, which results in the cyan Ripple and the orange Ripple to follow one another closely (that's how I timed it). How it properly works for a couple minutes: And again after ~15-20min it completely desynchronizes into this mess: Something is off with iCUE's internal timer, which worked just fine in CUE2.outrun.cueprofile Link to comment Share on other sites More sharing options...
VapeNayshYall Posted April 1, 2018 Share Posted April 1, 2018 You're not alone bruh. I've been experiencing this as well. It's bothered me enough to a point where I've created a static profile just to ride it out until they fix this issue. Do you also get the occasional flickering with your lighting? Link to comment Share on other sites More sharing options...
DemonRoxas Posted April 1, 2018 Author Share Posted April 1, 2018 Haven't noticed any flickering yet... but this synchro issue bugs me the hell out. Link to comment Share on other sites More sharing options...
totorman Posted April 2, 2018 Share Posted April 2, 2018 Seeing the same desynchronization with a home made moving rainbow effect. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted April 2, 2018 Corsair Employee Share Posted April 2, 2018 Thanks for the feedback. Can you provide a log? (You can export a log in iCUE by going to "Settings" then clicking the "Export" button). Link to comment Share on other sites More sharing options...
DemonRoxas Posted April 2, 2018 Author Share Posted April 2, 2018 Here you go. I've also attached the iCUE profile to the main post so you can test it with your hardware.icue_log.zip Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.