Zotty Posted October 16, 2018 Author Share Posted October 16, 2018 thanks dude :D .. must admit i do love my man cave haha.. good luck on your quest! and let us know how you get on Link to comment Share on other sites More sharing options...
gutcheck Posted October 17, 2018 Share Posted October 17, 2018 Ok. How does one upload a video? Link to comment Share on other sites More sharing options...
DevBiker Posted October 17, 2018 Share Posted October 17, 2018 Ok. How does one upload a video? You'd have to upload to some sort of sharing service - like YouTube but One Drive will do or other services - and then post it here. Link to comment Share on other sites More sharing options...
7OMM Posted October 28, 2018 Share Posted October 28, 2018 couple of updated Diagrams for anyone after idea's http://i.imgur.com/hvFeswUl.png see this Zotty, If i want this in a 1000D case what will i need exactly? i realize i will have to speak to Devbiker for some cable extensions of some sort and i need a Y splitter for the front fans if i am looking at correct. are all the fan LL RGB 120 so the 8 front, 3 up top and 2 at the rear? if so which way is the cheapest way to buy them (combo wise i.e. so many 3 packs, some singles etc?.) Regards, Tommy. P.S. Dev if your reading this can you give me a DM of the cost for the cable etc, thanks Link to comment Share on other sites More sharing options...
Zotty Posted October 28, 2018 Author Share Posted October 28, 2018 hi dude.. its 3x 140mm's up top.. rest are 120's. will have a shop around for you when i get to my pc and see who's got what.. you UK based? Link to comment Share on other sites More sharing options...
Zotty Posted October 28, 2018 Author Share Posted October 28, 2018 and Dev,, will be along at some point... he'll sort your cabling needs thats for sure.. :) Link to comment Share on other sites More sharing options...
7OMM Posted October 29, 2018 Share Posted October 29, 2018 sorry mate yes i am uk based. still on the fence with making the job as it gonna cost a good £300-£400 more to complete. Link to comment Share on other sites More sharing options...
Zotty Posted October 30, 2018 Author Share Posted October 30, 2018 it's not a cheap hobby is it lol.... i have just learnt to save a little longer lol Link to comment Share on other sites More sharing options...
Zotty Posted October 30, 2018 Author Share Posted October 30, 2018 Update coming tomorrow.... HELLO PRETTY!!!! http://i.imgur.com/GWMuWXfl.jpg Link to comment Share on other sites More sharing options...
clucernoni Posted November 5, 2018 Share Posted November 5, 2018 hey Stan :)... did you open a support ticket about the missing tray? and same.. yet to see the 120mm tray in stock my self.... Seriously, does anyone know how to get a hold of one of the 120mm trays? I bought this case expecting to be able to use 8x120mm top and front, but now can't find one for the top...I'd even take a 6x140mm...? Link to comment Share on other sites More sharing options...
Zotty Posted November 5, 2018 Author Share Posted November 5, 2018 i have been watching out for stock of the 4x120.. saw them once lol. missed my chance,, uk Corsair online store has the 8x120 and 3x140 in stock atm https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Obsidian-1000D-8x-120mm-Fan-Tray/p/CC-8900160 https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Obsidian-1000D-3x-140mm-Fan-Tray/p/CC-8900161 here is the 4x120 for easy checking stock in future https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Obsidian-1000D-4x-120mm-Fan-Tray/p/CC-8900177 Link to comment Share on other sites More sharing options...
clucernoni Posted November 5, 2018 Share Posted November 5, 2018 (edited) i have been watching out for stock of the 4x120.. saw them once lol. missed my chance,, uk Corsair online store has the 8x120 and 3x140 in stock atm https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Obsidian-1000D-8x-120mm-Fan-Tray/p/CC-8900160 https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Obsidian-1000D-3x-140mm-Fan-Tray/p/CC-8900161 here is the 4x120 for easy checking stock in future https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Obsidian-1000D-4x-120mm-Fan-Tray/p/CC-8900177 I wonder if they ship to the US. This is basically holding up my build at this point! lol Edited November 5, 2018 by clucernoni Link to comment Share on other sites More sharing options...
Zotty Posted November 9, 2018 Author Share Posted November 9, 2018 [ame] [/ame] Link to comment Share on other sites More sharing options...
Pizzo Posted November 12, 2018 Share Posted November 12, 2018 Hey Zotty, I had a question about the setup for the fans in the case, and also a question about the difference in two fans. 1. Which fans are intake and exhaust? you have 8 120 LL in the front, and 3 140 LL on the top? 2 120 LL on the back? Trying to figure that out. 2. What is the difference between ML and LL. I am having such a hard time figuring this out, any help with this would be greatly appreciated. Link to comment Share on other sites More sharing options...
DevBiker Posted November 12, 2018 Share Posted November 12, 2018 1) The front LLs are intake. The rest are exhaust. 2) The ML fans use a different bearing (magnetic levitation). They are super-quiet as there is no bearing friction. This also means that they should last darn near forever. They are designed to be great radiator fans. The LL fans are lower speed and have hydraulic bearings. While quite good, they aren't quite as good as the magnetic levitation. They are designed more as general purpose/hybrid fans. They'd do fine on a radiator but not quite as good as the MLs. TBH, in most use cases, you won't know the difference. The LL fans do have 16 LEDs as opposed to only 4 for the MLs but the LLs shine more to the front; the MLs LEDs have the same effect front or back. Link to comment Share on other sites More sharing options...
Pizzo Posted November 12, 2018 Share Posted November 12, 2018 1) The front LLs are intake. The rest are exhaust. 2) The ML fans use a different bearing (magnetic levitation). They are super-quiet as there is no bearing friction. This also means that they should last darn near forever. They are designed to be great radiator fans. The LL fans are lower speed and have hydraulic bearings. While quite good, they aren't quite as good as the magnetic levitation. They are designed more as general purpose/hybrid fans. They'd do fine on a radiator but not quite as good as the MLs. TBH, in most use cases, you won't know the difference. The LL fans do have 16 LEDs as opposed to only 4 for the MLs but the LLs shine more to the front; the MLs LEDs have the same effect front or back. So are the rear fans also 120 LL? At the top of the case is it 3 140's LL, then Radiator, then two 140 ML's underneath? Link to comment Share on other sites More sharing options...
Zotty Posted November 12, 2018 Author Share Posted November 12, 2018 So are the rear fans also 120 LL? At the top of the case is it 3 140's LL, then Radiator, then two 140 ML's underneath? Hey buddy.. sorry about delay in answering... was asleep lol.. yes the rear fans are LL120... tops are LL1240's and yes i have the stock ML RGB fans on the other side of the H115i Platinum... Link to comment Share on other sites More sharing options...
Pizzo Posted November 12, 2018 Share Posted November 12, 2018 How many Lightning Node Pros do you use for this setup? What product is "RGB Fan Led Hub" Link to comment Share on other sites More sharing options...
Zotty Posted November 12, 2018 Author Share Posted November 12, 2018 How many Lightning Node Pros do you use for this setup? I have 3 Node Pro's running outside my case for desk lighting. the 2 Commander Pro's inside the case handle the case lighting.. What product is "RGB Fan Led Hub" all covered here dude http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
Wiscogamerz Posted November 17, 2018 Share Posted November 17, 2018 vertical Gpu mount. http://i.imgur.com/Hvzzr1zl.jpg Remove the 2 screws. http://i.imgur.com/fzARlzXl.jpg replace the horizontal PCiE bracket with the above supplied Vertical mount. http://i.imgur.com/CFHPTUal.jpg http://i.imgur.com/tTe0A5jl.jpg now due to access to the screws when mounting the GPU my advice would be fit the bracket to your card first.. I will be using the Cooler Master Riser Cable my self http://i.imgur.com/Rigxtvdl.jpg I got mine for around £20 from a Reputable UK online store... more to come on this Is it possible that I didn’t recieve the vertical gpu mount the one I got in my box is the exact same as the one installed there’s no way to mount it vertically can’t get a hold of Corsair today either because it’s a weekend. Link to comment Share on other sites More sharing options...
Zotty Posted November 17, 2018 Author Share Posted November 17, 2018 it should be in the little box of accessories buddy.. so effectively you got 2 the same?. not making assumpitions her bud.. but they do look very similar to each other..... Link to comment Share on other sites More sharing options...
Wiscogamerz Posted November 17, 2018 Share Posted November 17, 2018 Yea I thought the same thing but they are both the exact same they don’t look any different at all tabs are in the same location it’s basically just the same piece and I don’t know exactly how to go about getting them to send me a new one. I would post a pic but can’t do it from my cell and I’m not at home but I will try again Link to comment Share on other sites More sharing options...
Wiscogamerz Posted November 17, 2018 Share Posted November 17, 2018 That’s the pic in the bottom they are the exact same which sucks because now I can’t finish my build this weekend hopefully I can get them to send me one fast do you know who I should contact or what to do to get the correct one sent to me by chance thanks Link to comment Share on other sites More sharing options...
Zotty Posted November 17, 2018 Author Share Posted November 17, 2018 Contact support buddy.. click Support Ticket System at the top of this page Link to comment Share on other sites More sharing options...
Zotty Posted November 18, 2018 Author Share Posted November 18, 2018 (edited) update on how the System is Currently Set up. http://i.imgur.com/AUTbNFBl.png I have added one of DevBiker's RGB Fan LED Hub Splitter Cables to allow me to have Both of my Front RGB Fan LED Hubs on the Same LED channel. which in turn Free'd up a LED channel on my Commander Pro.. YAY!!! more strips!!! lol... Here's a Link DevBikers Cable Repair/Modification/Making Work Shop ... worth the read, Will include some Pictures of the Splitter cables soon.. Edited November 18, 2018 by Zotty Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now