GamingJohn Posted July 9, 2018 Share Posted July 9, 2018 Hey guys, I've recently built my new computer and thing have been going great; but I'm having a small issue I'm hoping someone can resolve: I've noticed when I'm scrolling on web pages such as Facebook, Forums etc. if I'm not touching the mouse and not scrolling, my PC is almost dead quite, as soon as I scroll to read more or continue on the page, the fans on my H100i V2 begin to operate at maximum speeds which is super loud. Also; when just sitting on my desktop with nothing open, my computer is silent, as soon as I open a game such as Fortnite and I'm just sitting in the lobby waiting for the game to begin, my H100i V2 fans again will start to blow at 100% until I exit the game. This is super frustrating and loud - is there any simliar issues anyone has experienced or any kind of resolution to this? Thanks. Link to comment Share on other sites More sharing options...
Zotty Posted July 9, 2018 Share Posted July 9, 2018 2 things to check,, You have it plugged into the CPU header and that header set to 100% in Bios? or Have you set the fans to react to CPU package rather than liquid temp (default and best option). if it's set to CPU package then it will make your fans ramp up and down regular as its such an unstable temp source.. liquid temp is the better option as ultimately this is what your fans are trying to cool... Link to comment Share on other sites More sharing options...
DevBiker Posted July 9, 2018 Share Posted July 9, 2018 Take a look at the cooler FAQ (in my signature) ... #A3-A4. Link to comment Share on other sites More sharing options...
GamingJohn Posted July 9, 2018 Author Share Posted July 9, 2018 2 things to check,, You have it plugged into the CPU header and that header set to 100% in Bios? or Have you set the fans to react to CPU package rather than liquid temp (default and best option). if it's set to CPU package then it will make your fans ramp up and down regular as its such an unstable temp source.. liquid temp is the better option as ultimately this is what your fans are trying to cool... How do I check to see if I’ve set the fans to react to the CPU rather than the liquid temp? Link to comment Share on other sites More sharing options...
ram1220 Posted July 9, 2018 Share Posted July 9, 2018 Open Corsair Link and under your H100i V2 click the little red circle next to your fan RPM. Under the Group setting make sure that H100i V2 is selected. Link to comment Share on other sites More sharing options...
c-attack Posted July 9, 2018 Share Posted July 9, 2018 Are you using Link or iCUE to control the system? For Link, Click on the fan reading in the "H100i v2" Box . This will create a pop up graph. The "group" should be H100i v2 Temp (coolant temperature). The group is the control variable. For iCUE, go to the H100i v2 Tab from the main panel. What are you using for a fan curve? If custom curve, you will see a drop down box at the bottom. Unfortunately, the names of all those variable choices are truncated. Scroll down until you find H100i v2 Temp. You will want to adjust your curve if you made it for CPU temp points in the 60-80C range. Coolant temps typically run from 20-40C. Link to comment Share on other sites More sharing options...
GamingJohn Posted July 10, 2018 Author Share Posted July 10, 2018 Open Corsair Link and under your H100i V2 click the little red circle next to your fan RPM. Under the Group setting make sure that H100i V2 is selected. It is set to the H100i V2; however; my fan RPM speed is showing 0 but both fans are spinning. http://i66.tinypic.com/igz14n.jpg Link to comment Share on other sites More sharing options...
c-attack Posted July 10, 2018 Share Posted July 10, 2018 OK, the zero can mean two things. 1) As Zotty inquired about in the first post, are your radiator fans connected to the cooler/pump block? Or the motherboard? If to the motherboard, than Link will show zero and we are in the wrong place to change their speed (although you may want to put them on the pump controller to resolve this). 2) If the fans are connected to pump, then the internal fan controller may have an issue. It would explain the surging and this model should never show zero rpm. Can you double click on the "0 rpm" in the H100iv2 Box and tell us what you see? Link to comment Share on other sites More sharing options...
GamingJohn Posted July 10, 2018 Author Share Posted July 10, 2018 OK, the zero can mean two things. 1) As Zotty inquired about in the first post, are your radiator fans connected to the cooler/pump block? Or the motherboard? If to the motherboard, than Link will show zero and we are in the wrong place to change their speed (although you may want to put them on the pump controller to resolve this). 2) If the fans are connected to pump, then the internal fan controller may have an issue. It would explain the surging and this model should never show zero rpm. Can you double click on the "0 rpm" in the H100iv2 Box and tell us what you see? I honestly have so many wires everywhere in the back of the case that I don't know whats connected to what anymore :eek: :eek: :eek: I'll have to check later today. I'm just afraid to start pulling wires and never get it back to how it is now lol. Link to comment Share on other sites More sharing options...
GamingJohn Posted July 10, 2018 Author Share Posted July 10, 2018 OK, the zero can mean two things. 1) As Zotty inquired about in the first post, are your radiator fans connected to the cooler/pump block? Or the motherboard? If to the motherboard, than Link will show zero and we are in the wrong place to change their speed (although you may want to put them on the pump controller to resolve this). 2) If the fans are connected to pump, then the internal fan controller may have an issue. It would explain the surging and this model should never show zero rpm. Can you double click on the "0 rpm" in the H100iv2 Box and tell us what you see? http://i64.tinypic.com/2qb7o1k.png This is what shows when I double click the 0RPM. Link to comment Share on other sites More sharing options...
c-attack Posted July 10, 2018 Share Posted July 10, 2018 Ok, properly set to coolant temp. Curve looks appropriate. That brings us back to whether the fans are actually connected to the pump or to the motherboard directly. Link to comment Share on other sites More sharing options...
DevBiker Posted July 10, 2018 Share Posted July 10, 2018 Where are the fans plugged in? The motherboard? Or the pump's fan header? Link to comment Share on other sites More sharing options...
GamingJohn Posted August 13, 2018 Author Share Posted August 13, 2018 Okay guys, finally got the time this weekend to re-do the wiring in my computer, can someone point me in the right direction on where to plug in all the wires that come with the H100i V2 in to my ASUS Z370-F Motherboard? Here is a pic: Link to comment Share on other sites More sharing options...
DevBiker Posted August 14, 2018 Share Posted August 14, 2018 CPU Fan Header. Next to the RAM. And go into the BIOS and disable Q-Fan for the CPU Fan Header. Link to comment Share on other sites More sharing options...
GamingJohn Posted August 15, 2018 Author Share Posted August 15, 2018 CPU Fan Header. Next to the RAM. And go into the BIOS and disable Q-Fan for the CPU Fan Header. Thanks! That is the proper set up for this cooler and mobo? Link to comment Share on other sites More sharing options...
c-attack Posted August 15, 2018 Share Posted August 15, 2018 Yes, we generally recommend CPU fan as the control header for a couple reasons. 1) something has to be on CPU fan to boot. 2) CPU fan is generally limited to CPU temp only and on Asus boards there are often hidden behavior parameters designed for safety with air towers. Quick fan reactions aren't really an asset with a case fan, so this makes it a nice place to park the H100i v2 header which doesn't need any controlling - just a constant 100%/12v signal. 3) When on CPU fan, if something were to happen to the cooler on power on, you would get an immediate BIOS CPU fan boot error letting you know something drastic went wrong. This is the same error message you get when nothing is there, as in point 1. Remember the H100i v2 has its own internal fan controller for the radiator fans. You don't use the BIOS or AI Suite to change fan and pump speeds. That will not work out well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.