falcon7370 Posted June 11, 2019 Share Posted June 11, 2019 It seems that the performance settings featured in the iCUE Hydro X setup video are missing. I have the latest version. Anyone else have this issue? Link to comment Share on other sites More sharing options...
DevBiker Posted June 12, 2019 Share Posted June 12, 2019 Is a lighting channel configured on the the Commander Pro as HydroX? Do you have existing fan curves for the CoPro as well? Link to comment Share on other sites More sharing options...
falcon7370 Posted June 12, 2019 Author Share Posted June 12, 2019 Is a lighting channel configured on the the Commander Pro as HydroX? Do you have existing fan curves for the CoPro as well? Currently, my GPU, CPU, and pump are daisy chained and connected to a Lighting Node Pro, along with another RGB hub. The lighting node pro has a channel configured for Hydro X and I can control all RGB lighting. I have all of my fans and the pump PWM, along with an additional RGB hub connected directly to the CoPro. The only fan curves that are available to me in CoPro are the defaults (Quiet, Balanced and Extreme). Link to comment Share on other sites More sharing options...
DevBiker Posted June 12, 2019 Share Posted June 12, 2019 Right. You need to put the lighting channel for HydroX on the Commander Pro. Then you'll see the curves. And the temp sensor from the pump should go into Temp #1 on the CoPro. Link to comment Share on other sites More sharing options...
falcon7370 Posted June 12, 2019 Author Share Posted June 12, 2019 (edited) So I tried to create a 'dummy' Hydro X lighting channel on the commander pro and that didn't seem to work. I'm guessing it absolutely has to plug into the commander pro? My temperature probe is plugged into the first temperature sensor port. EDIT: If that's the case, currently this is not possible for me. The RGB cables on the waterblocks and pump are incredibly short and don't reach the commander pro in my case. Having them reach a lighting node pro is easy because of how small the node pro is. Any thoughts? I saw that you can get custom made RGB fan extension cables but since these are 3 pin , I wasn't sure what my options were. Edited June 12, 2019 by falcon7370 Link to comment Share on other sites More sharing options...
DevBiker Posted June 12, 2019 Share Posted June 12, 2019 I've also noticed that the custom curves don't appear if you have any custom fan curves with the Commander Pro. As for the RGB extensions - how long do you need? If you have RGB Strips, they come with extensions that would work. Link to comment Share on other sites More sharing options...
falcon7370 Posted June 12, 2019 Author Share Posted June 12, 2019 I did have 1 custom curve when I tried creating a dummy Hydro X lighting channel. I will try deleting it and attempt that again . Is this a known issue with iCUE? Seems like the stars have to align for these Hydro curves to appear. I do not have the LED kit. I did see the extensions there though and I think they will work. It just sucks having to spend 40 dollars potentially just to get 1 extension cable. Link to comment Share on other sites More sharing options...
DevBiker Posted June 12, 2019 Share Posted June 12, 2019 I did have 1 custom curve when I tried creating a dummy Hydro X lighting channel. I will try deleting it and attempt that again . Is this a known issue with iCUE? Seems like the stars have to align for these Hydro curves to appear. I have reported it. I'm considering doing a little script that'll just inject them into an existing configuration file. It's not that difficult if you are comfortable with XML and you know where to dig around. I do not have the LED kit. I did see the extensions there though and I think they will work. It just sucks having to spend 40 dollars potentially just to get 1 extension cable. Which extension cable is that? Where do you live? And how long do you need? Link to comment Share on other sites More sharing options...
falcon7370 Posted June 12, 2019 Author Share Posted June 12, 2019 I have reported it. I'm considering doing a little script that'll just inject them into an existing configuration file. It's not that difficult if you are comfortable with XML and you know where to dig around. Which extension cable is that? Where do you live? And how long do you need? That would be pretty useful. I'm a software developer myself so I'm pretty familiar with XML. The extension cable I'm seeing that should work comes with the Corsair RGB LED Lighting PRO Expansion Kit, as it seems I will need a male to female 3-pin RGB extension cable that's included for the RGB strips to make the HydroX pump RGB cable reach my CoPro (everything else is daisy chained off of my pump). I'm thinking 30cm to be safe. I currently live in Ohio (USA). Link to comment Share on other sites More sharing options...
Spartanaco Posted September 19, 2019 Share Posted September 19, 2019 Any update on this? I just got my custom loop finished with all Hydro X components and I am not seeing any Hydro X Performance profiles available in iCUE for the Commander Pro (only the defaults of Quiet, Balanced, and Extreme). I also have my Hydro X LED components plugged into a Lighting Node Pro due to the short length of the cables, but my XD5+XG7 are daisy chained on one of the Node Pro ports and the other port is the XC7. I have it configured properly for the lighting channels for the Node Pro, and also have the XD5 temp sensor plugged into the temp 1 channel, and the PWM for the XD5 is in port 6 of the PWM ports. Any help on this would be greatly appreciated. I don't seem to have the cable length to connect the XD5+XG7 to the Commander Pro directly. Link to comment Share on other sites More sharing options...
c-attack Posted September 19, 2019 Share Posted September 19, 2019 You don't have to daisy chain them if you have the RGB channels available. The only difference might be when I set a preset lighting effect, the daisy chained ones automatically go in sequence with each other Your stray XC7 may have its own orbit. That may be of no concern at all, just FYI. As for the missing Hydro curves, try restarting the service from the settings menu. Every now and then when I reset up iCUE from scratch it isn't there the first time. If the easy way does not work, you can quit iCUE and the Corsair Service in the task manager, then go C:Users/(name)/app data (hidden)/Roaming/Corsair/CUE/Cooling and delete the congfig file in that folder. Then restart iCUE. This has forced a reload in the past. Be aware this will wipe any custom curves you have already made, so the safer option is to cut and paste it to the desktop if you are trying to save those and this does not work. Link to comment Share on other sites More sharing options...
kvothe7 Posted October 12, 2019 Share Posted October 12, 2019 I'm having the same issue as Spartanco regarding the Hydro X Performance options not appearing. I just tried c-attacks suggestions and none worked at bringing the options up. Without iCUE recognition of the pump for what it is, it refuses to move more than a trickle of fluid at a time Link to comment Share on other sites More sharing options...
DevBiker Posted October 12, 2019 Share Posted October 12, 2019 I'm having the same issue as Spartanco regarding the Hydro X Performance options not appearing. I just tried c-attacks suggestions and none worked at bringing the options up. Without iCUE recognition of the pump for what it is, it refuses to move more than a trickle of fluid at a time First, set the fan port for the pump to 4-pin/PWM. Then you can set a custom curve for it. If you want, the settings for the default HydroX Pump Curve are in the HydroX FAQ: https://forum.corsair.com/v3/showthread.php?t=188181. Link to comment Share on other sites More sharing options...
kvothe7 Posted October 12, 2019 Share Posted October 12, 2019 First, set the fan port for the pump to 4-pin/PWM. Then you can set a custom curve for it. If you want, the settings for the default HydroX Pump Curve are in the HydroX FAQ: https://forum.corsair.com/v3/showthread.php?t=188181. Wow you are a hero thanks a ton man! Now I don't have to wait a week to hear back from the support team lol Link to comment Share on other sites More sharing options...
Recommended Posts