IRAKLION Posted September 2, 2010 Share Posted September 2, 2010 1. With the thick ATX power cable threaded through from below I am unable to get the side panel to close, without a bulge in the middle. Trying to maneuver the ATX power cable fully within the cable management compartment doesn't seem to work. The cable is from a Corsair HX-650W. Can anyone suggest a solution? 2. I was easily able to get the flap over the front panel inputs to open, but now it won't catch closed. Has anyone a suggested remedy? Thanks much Link to comment Share on other sites More sharing options...
Wired Posted September 9, 2010 Share Posted September 9, 2010 Please post a pic of what you're talking about for both scenarios? Link to comment Share on other sites More sharing options...
Xenofin Posted September 10, 2010 Share Posted September 10, 2010 I have 700d + 750HX and noticed the same but I solved this by attaching this cable tightly with multiple cable ties. Link to comment Share on other sites More sharing options...
McShack1 Posted September 14, 2010 Share Posted September 14, 2010 I have 700d + 750HX and noticed the same but I solved this by attaching this cable tightly with multiple cable ties. Yeah, I was able to do the same thing with my 700D and TX950. I would have gone with the AX1200 or the HX1000, but the deal I got on the TX950 saved me enough to get the 700D. :D: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 14, 2010 Corsair Employee Share Posted September 14, 2010 Zip ties are the likely solution. Link to comment Share on other sites More sharing options...
McShack1 Posted September 14, 2010 Share Posted September 14, 2010 I'm not saying that another 1/4" space behind the mobo would not have been nice, but using zip ties helped eliminate any buldge in the side panel. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.