uvdragon Posted February 23, 2006 Share Posted February 23, 2006 Why doesnt my memory latency config work with 2 3 3 6 only 2,5 3 3 6? I dont have much experience with overclocking. http://www.corsair.com/corsair/products/specs/twinx2048-3200c2.pdf Link to comment Share on other sites More sharing options...
Wired Posted February 24, 2006 Share Posted February 24, 2006 Are you attempting to overclock the memory? What memory voltage is it set to? Link to comment Share on other sites More sharing options...
uvdragon Posted February 24, 2006 Author Share Posted February 24, 2006 Are you attempting to overclock the memory? What memory voltage is it set to? I tried 2,6 2,7 2,8 volts but the computer turns off when windows starts. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 1, 2006 Corsair Employee Share Posted March 1, 2006 That would suggest some other problem. Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.