HellSpawn Posted February 8, 2006 Share Posted February 8, 2006 Please help me. I have 2 gig of matched Corsair PC-4300 (675Mhz) (4 x 512 Megabytes) that dose not want to run in my Abit-AL8. This system was running perfect with 1 gig of Corsair PC3200 RAM TwinX Kit LED, but I needed 2 gig of matched ram and I couldn’t purchase it anymore. Now when I put all or even just some of the PC-4300, the pc fails to boot and on start up comes up with a post code 60 Error and it fails to start! Any suggestions will be greatly accepted! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 8, 2006 Corsair Employee Share Posted February 8, 2006 Could you give me the exact Corsair part# of both modules? Link to comment Share on other sites More sharing options...
HellSpawn Posted February 14, 2006 Author Share Posted February 14, 2006 The exact Corsair part# is XMS2-5400 521 675MHz 4.4.4.12! Pretty please help me.:[pouts: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 15, 2006 Corsair Employee Share Posted February 15, 2006 XMS-4300 = 533 MHz XMS-5400 = 667 Mhz Are you trying to mix these modules? If so what are the exact modules part# (How To Read the Memory Label) Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
HellSpawn Posted February 18, 2006 Author Share Posted February 18, 2006 XMS5402v4.1 XMS4303v1.1 Link to comment Share on other sites More sharing options...
Wired Posted February 18, 2006 Share Posted February 18, 2006 It's never recommended to mix memory of different part #s. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.