pvc4twenty Posted February 5, 2006 Share Posted February 5, 2006 My cpu is very unstable. I initially thought the problem was the board but Asus has replaced it for me. I am beginning to believe that maybe the latency settings arent correct. What are the correct settings for the VS512MB400 and how do I set them. I greatly appreciate any help on this matter. I am ready to smash this $1,000 piece of junk. Link to comment Share on other sites More sharing options...
Wired Posted February 5, 2006 Share Posted February 5, 2006 CAS Latency (tCL): 2.5 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 8 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
pvc4twenty Posted February 5, 2006 Author Share Posted February 5, 2006 Did all of that and still shuts down....Any suggestions? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 6, 2006 Corsair Employee Share Posted February 6, 2006 Did all of that and still shuts down....Any suggestions? If your system is just shutting off I would maybe try another PSU and or make sure the system is not shorting out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.