Ven0m Posted February 5, 2006 Share Posted February 5, 2006 I've recently overclocked my RAM(CMX512-3200 C2) on a Asus A8N SLi deluxe mobo, it clocks fine and handles it, but when I try to boot from a full shut down it cold boots and gives me three beeps which I suspect has something to do with my RAM, do you guys think its my RAM or my BIOS? Link to comment Share on other sites More sharing options...
Wired Posted February 5, 2006 Share Posted February 5, 2006 At warrantied timings / voltage (NOT OVERCLOCKED), is it ok? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 6, 2006 Corsair Employee Share Posted February 6, 2006 I would check your PSU as the memory will not usually cause that type of problem. Also the Video card you have need s about 22-26 amps and the PSU you have is about 15 amps I think but please check. Link to comment Share on other sites More sharing options...
Ven0m Posted February 11, 2006 Author Share Posted February 11, 2006 xms3202v1.5, is another code from modules, what can I expect to reach as a maximum overclock? and using how much voltage? if i actively cool them. the above questions are presuming i chage the timings to 8-3-3-2.5 thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 12, 2006 Corsair Employee Share Posted February 12, 2006 All I can officially tell you would be the tested settings. Cas 2-3-3-6 at DDR400. You will just have to test them in your system. But the max supported Voltage is 2.9 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.