helaspa Posted January 6, 2006 Share Posted January 6, 2006 Help! I think that my memory sticks are dead! The computer is 100% OK with other memory sticks, but when I put in my corsair, the computer crashes every time. How can I get them replaced? Thanks, Alison Link to comment Share on other sites More sharing options...
Wired Posted January 6, 2006 Share Posted January 6, 2006 What CPU / FSB / Motherboard do you have? What is the exact part # and revision # of each stick? Is it a TwinX pack? How To Read the Memory Label If you have more than one stick, have you tested one stick at a time in each slot using Memtest86+? Click here to find out how you can add your system specs to your profile and posts! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 12, 2006 Corsair Employee Share Posted January 12, 2006 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.