IceBurn Posted November 25, 2005 Share Posted November 25, 2005 Could someone help me with setting the timings for TWINX2048-3200C2 on my asus A8N32. I tried the recommended settings and it worked in windows but when i tried running a game my system reset. Currently i have them set as 2.5-3-3-6 which seems to work. Link to comment Share on other sites More sharing options...
ZeroZero Posted November 25, 2005 Share Posted November 25, 2005 Have you set you memory Volt to 2.75 V as recommended by this (link) document from Corsair? You will find out how to do this in BIOS from your user manual. Link to comment Share on other sites More sharing options...
IceBurn Posted November 26, 2005 Author Share Posted November 26, 2005 I did set the ram to 2.75v but that didnt work. I've been running 2.5-3-3-6 and that seems to be okay when running games. If I raise the voltage will that help? Link to comment Share on other sites More sharing options...
Wired Posted November 26, 2005 Share Posted November 26, 2005 It could, yes. They're warrantied up to, but not over, 2.90 volts. Link to comment Share on other sites More sharing options...
IceBurn Posted November 28, 2005 Author Share Posted November 28, 2005 I tried increasing the voltage and that didnt seem to work. Anyone got any ideas what i can do to get them working at 2-3-3-6? Link to comment Share on other sites More sharing options...
Ulvster Posted November 28, 2005 Share Posted November 28, 2005 I have tested two sets of TWINX2048-3200C2 with 3 different MB's (MSI NEO4 Platinum, Epox 9NPA+ SLI and an Asus A8N SLI), and 2 different X2's a 3800+ and a 4400+ - Conclusion: These sticks really don't like the X2 at all. Had to run them at 2.5-3-3-6 in all configurations, and they oc like ****** too... Put a Single core A64 in and all is well... :mad: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 29, 2005 Corsair Employees Share Posted November 29, 2005 This is a limitation of the memory controller and is normal. If you use more than 2 double sided module you would need to run the memory at DDR333 and more relaxed settings would be needed as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.