it_purchaser Posted November 16, 2005 Share Posted November 16, 2005 The system array crashed, during rebuild I receive several blue screens. Ran MemTest86+ which passed chip 1 but fail twice on chip 2 in test #7. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 16, 2005 Corsair Employees Share Posted November 16, 2005 Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
it_purchaser Posted November 17, 2005 Author Share Posted November 17, 2005 MB: EPox 8K9A2+ CPU: AMD Sempron 2800 CPU FSB: 166 Freq X 12 DRAM: 333Hmz CAS Latency: 2.5 Bank Inter: Disa Trg: 3T Tras: 7T/10T Trcd: 3T Burst: 4 Write Recovery: 2T tWTR: 1T CPU Real Clock: 2000Mhz 166x12, FSB 333 Dram Clk 333, type PC2700 is all of this really necessary????? 1 on this pair memory set tests bad every time!!! 1 of this pair memory tests good every time!!! Link to comment Share on other sites More sharing options...
Wired Posted November 17, 2005 Share Posted November 17, 2005 He's not asking anything extreme. Your original post could be construed in 2 ways: either you tested one stick at a time, or you tested both at the same time and assumed the memory location was in stick one or stick two. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 17, 2005 Corsair Employees Share Posted November 17, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.