element533 Posted November 15, 2005 Share Posted November 15, 2005 Hi, One module of the matched pair is failing all tests in memtest86. All BIOS settings are set to default (SPD, no PAT, no O/C). May I please obtain an RMA? Thanks Link to comment Share on other sites More sharing options...
Wired Posted November 15, 2005 Share Posted November 15, 2005 Make sure the DDR voltage is 2.7x volts (warrantied up to, but not over, 2.9 volts). Link to comment Share on other sites More sharing options...
element533 Posted November 15, 2005 Author Share Posted November 15, 2005 Yes sir, the voltage is set to the default 2.7 v. The other module in the matched pair passes all tests, and both modules in a different matched pair of the same model pass all tests as well. This is the only module out of 4 that has a problem. I've tested the module on two different systems with the same result: all tests in memtest86 immediately fail (approx 1,000 failures / sec). Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted November 16, 2005 Corsair Employee Share Posted November 16, 2005 Let's get them both replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.