WHIPDADDY Posted April 26, 2005 Share Posted April 26, 2005 ran memtest on all sticks separetely and numerous read errors occurred at specific addresses replaced with crucial memory and no errors were found would like replacements to use in another MB Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 26, 2005 Corsair Employees Share Posted April 26, 2005 Can you tell me our modules part# (How To Read the Memory Label) and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
WHIPDADDY Posted May 1, 2005 Author Share Posted May 1, 2005 Can you tell me our modules part# (How To Read the Memory Label) and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? the cpu is at 133mhz i think the fsb is 266mhz the mobo has no overclocking adjustments tyan kt-a s2390b with via 133 chipset Link to comment Share on other sites More sharing options...
Wired Posted May 1, 2005 Share Posted May 1, 2005 Again, what Corsair memory do you have? Link to comment Share on other sites More sharing options...
WHIPDADDY Posted May 2, 2005 Author Share Posted May 2, 2005 Again, what Corsair memory do you have? i am sorry . i thoughgt i had netered i the part number at first post 3 pieces vs512mb133 /023339 thanks whipdaddy Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 2, 2005 Corsair Employees Share Posted May 2, 2005 With Tyan, I would suggest you send these back to your reseller and then ask them to get modules that are listed on Tyan's QVL list for best compatibility. But I have no problem replacing the modules, but I doubt that will solve this issue. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.