slow machete Posted September 4, 2018 Share Posted September 4, 2018 Hello all, can u help. See attach. The problem is that PSU Shroud Cover Plate light and Front logo light do not working after changing stock SP120 RGB (x3) to LL120 RGB LED (x3). Is the scheme correct? Why? Case Crystal 570X! 10x. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Caliente Posted September 4, 2018 Corsair Employees Share Posted September 4, 2018 Hey there, Make sure you set up your LED channel 2 to SP120 RGB Single fan on iCUE since that's where you have the shroud plugged in. Additionally, I don't recommend connecting the ML120 RGB fan into the same RGB Fan HUB as the other LL fans. Each HUB can only house 1 set of RGB fans at a time and what you're doing could cause some conflicts. Link to comment Share on other sites More sharing options...
Zotty Posted September 4, 2018 Share Posted September 4, 2018 Have you checked the RGB Fan LED Hubs Sata Connection? Link to comment Share on other sites More sharing options...
Zotty Posted September 4, 2018 Share Posted September 4, 2018 Additionally, I don't recommend connecting the ML120 RGB fan into the same RGB Fan HUB as the other LL fans. Each HUB can only house 1 set of RGB fans at a time and what you're doing could cause some conflicts. Agreed.. its nothing major aside from some effects not displaying correctly... Personally i'm not a fan (LOL) of mix n match.. keep them all the same dude... more here http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.