HellJumper SK Posted May 20, 2017 Share Posted May 20, 2017 Received my K95 Platinum yesterday, really liking it so far. One thing I noticed was occasionally when turning the volume wheel downwards to lower the volume, the volume will continue to lower on its own, all the way down to zero. When this happens, the RGB pattern stays still, and is still illuminated, and the entire keyboard stops working (can't type anything). I have unplugged the USB a few times, after plugging back in it starts working. It is extremely hard to replicate, I tried to keep scrolling the wheel down, sometimes I got it to freeze. The wheel itself seems normal, not catching on anything, the scroll is smooth. I tried to spin the wheel lots when CUE was not open, it has not frozen yet. Has anyone heard of something like this? Does this sound like a defective keyboard? Or bad software? Thanks in advance Link to comment Share on other sites More sharing options...
HellJumper SK Posted May 20, 2017 Author Share Posted May 20, 2017 Forgot to add, I am running CUE 2.13.80 Link to comment Share on other sites More sharing options...
seisan300 Posted March 13, 2018 Share Posted March 13, 2018 Hey there, I am new to this fourm and I just registered in it to reply this message. I know it's an old topic but this kind of freezing started to happend to my K95 RGB Platinum few weeks ago. As you stated it is hard to replicate and it happens to my keyboard all of a sudden: sometimes I'm just browsing the web, sometimes I'm running a game (where it kind of gets the most frustrating). It just suddenly freezes, the lights keep on and I cannot type anything. Un-plug and re-plug worked, but there was a time when even replugging the keyboard in the same USB port (3.0 or 2.0 no matter which I choose) didn't work until I managed to reset to factory settings. I've tried so far reseting to the factory sttings by holding the ESC key when I re-plug the keyboard. But so far I've done that about a dozen of times without succesfully fix it. I tried the force firmware upgrade thing too but nothing either. I bought the Keyboard since November 2017. I've got it for almost four months now. I was on the latest CUE 2.23.40 version when the issue started. I now reverted back to version 2.16.87. But hey! the freezing thing even happened to the keyboard when I just had uninstalled the newest version and was about to install the previous one, I mean nothing, no CUE was installed when it froze TWICE in a row. I was using the CUE on advance mode. Now I'm on the default one. I'm starting to think it's a defective keyboard. So disapointing for a product which claims to be the top of the line. Link to comment Share on other sites More sharing options...
seisan300 Posted March 13, 2018 Share Posted March 13, 2018 You know what I just realised? After a time passed since I reinstalled the older CUE Version and all seemed to be fine with my Keyboard, and I forgot connect my ST100 Stand back. After I did, I noticed in the CUE the ST100 it's not being detected even when the lights are by default in rainbow mode and I can connect succesfuly my Void Wireless Headset on it. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Nick Posted March 13, 2018 Corsair Employees Share Posted March 13, 2018 Try connecting the ST100 to a different USB 3.0 port stack on the back of the motherboard, preferable one with an Intel controller. Link to comment Share on other sites More sharing options...
seisan300 Posted March 13, 2018 Share Posted March 13, 2018 I did with CUE version 2.16.87 and nothing happened. However I made it worked back when I upgraded again to latest version 2.23.40. I now can visualize the ST100 in the CUE and custom its lights as usual. I Returned to the newest CUE version since the freezing happened to my keyboard again in the previous one. It didn't seem to matter if the K95 was connected in a 3.0 or 2.0 port directly to the MOBO's ports. I'm trying now connecting it into a PCI-E powered USP 3.0 HUB according to this post: http://forum.corsair.com/v3/showthread.php?t=138820 I wonder how long it'll last until K95 freezes again. Seriously, I would like to know if this problem has been adressed as that post is from 2015. Otherwise I would just like to know why so many users are experiencing this problem. Link to comment Share on other sites More sharing options...
jperaino24 Posted March 19, 2018 Share Posted March 19, 2018 I have a new K95 platinum running the latest CUE version and every time I adjust the volume it crashes the Windows Lock Key as well as the Light Brightness Key. Link to comment Share on other sites More sharing options...
Bury Tomorrow Posted March 19, 2018 Share Posted March 19, 2018 We discussed the same issue on this thread recently: http://forum.corsair.com/v3/showthread.php?t=175837 As far as we're concerned, this seems as a CUE related issue - as killing the process and restarting it restores normal and expected behaviour (and of course using the volume slider instantly locks those keys out of use). As I am doing so now, I strongly encourage anyone facing this exact same issue to let Corsair know of this by submitting a ticket on support.corsair.com (or using the support ticket system at the top of this page). Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Nick Posted March 20, 2018 Corsair Employees Share Posted March 20, 2018 (edited) We are aware of this issue, and have provided more issue in the following thread. http://forum.corsair.com/v3/showthread.php?t=175898 Edited March 20, 2018 by Corsair Nick Link to comment Share on other sites More sharing options...
EMJzero Posted August 11, 2019 Share Posted August 11, 2019 I know this is an old thread, but is the only one talking about my issue i could find...i bought a month ago a K95 RGB platinum from amazon, and despite the fact that it came with a slightly lifted backplate that i fixed was fine, but when i got used to it and had the chance to scroll the volume wheen for maybe more than a 360, it became stuck and kept raising the volume. I had to unplug the keyboard and plug it back, but whenever the wheel is scrolled too far it still happens...i'm on the firmware 3.21.7168, i just made the update but the problem persists:(:! HELP! Link to comment Share on other sites More sharing options...
Mobidic Posted September 9, 2019 Share Posted September 9, 2019 I have a similar issue than described below. If I use the scroll volume the system may start to push up or down the volume indefinitely and the rest of the keyboard is not responding. Only workaround found is to disconnect the keyboard and reconnect. Corsair support asked me to install a new firmwave via a drive that shows up when connecting the keyboard with a pin in the back keyboard pressed but that didn't resolve the issue. I know this is an old thread, but is the only one talking about my issue i could find...i bought a month ago a K95 RGB platinum from amazon, and despite the fact that it came with a slightly lifted backplate that i fixed was fine, but when i got used to it and had the chance to scroll the volume wheen for maybe more than a 360, it became stuck and kept raising the volume. I had to unplug the keyboard and plug it back, but whenever the wheel is scrolled too far it still happens...i'm on the firmware 3.21.7168, i just made the update but the problem persists:(:! HELP! Link to comment Share on other sites More sharing options...
Jayavarman5th Posted October 30, 2019 Share Posted October 30, 2019 I have this keyboard since around 2 years and still have this problem. I'm quite scared using the volume wheel. By the way, the quality of this keyboard isn't that great. The stands are placed very bad and they break very easily. Link to comment Share on other sites More sharing options...
gboy Posted November 3, 2019 Share Posted November 3, 2019 (edited) edit 2: yea sorry, this problem recurred after almost 3 full months of me 'fixing' it. So, I've tested another 'fix' instead. Now, I seem to have great results with setting my polling rate to anything below the maximum (1000hz/1msec) rate. Ive tested the 500hz/2msec polling rate reaaaaaaaally extensively (like 15 minutes of just scrolling the volume wheel up and down). So far 0 freezes. The moment I switch to the max 1000hz/1msec and spam scroll the volume wheel, freeze problem usually recurs within like 30 seconds or less. So, it does seem like polling rate's the issue here. Lets hope it stays that way. Will update all posts if problem recurs. edit: ok I think this fix works, courtesy of Corsair email support, cant believe nobody has reported on this fix considering how long this problem has been around for: "Google Chrome has a driver that takes control of our media keys, preventing them from being used with Desktop apps while Chrome is open. To fix this issue: - Head to ‘Chrome://Flags - Locate Hardware ‘Media Key Handling’ -From the drop down set to ‘Disable’ If this didn't help please do let us know." Now, Im spamming the volume wheel up and down like a madman for a couple minutes and so far 0 keyboard freezes. Im gonna try it over a couple weeks to be 100% certain. WIll update if this problem recurs! Edited January 30, 2020 by gboy Link to comment Share on other sites More sharing options...
ckong Posted November 29, 2019 Share Posted November 29, 2019 gboy, thanks for this. I've been running into this issue on my Corsair K70 RGB MK.2 Low Profile ever since I started to use the volume wheel. The problem has been very intermittent. I've applied this fix you shared. Crossing fingers it resolves the issue. Link to comment Share on other sites More sharing options...
Dirkbg Posted January 18, 2020 Share Posted January 18, 2020 edit: ok I think this fix works, courtesy of Corsair email support, cant believe nobody has reported on this fix considering how long this problem has been around for: "Google Chrome has a driver that takes control of our media keys, preventing them from being used with Desktop apps while Chrome is open. To fix this issue: - Head to ‘Chrome://Flags - Locate Hardware ‘Media Key Handling’ -From the drop down set to ‘Disable’ If this didn't help please do let us know." Now, Im spamming the volume wheel up and down like a madman for a couple minutes and so far 0 keyboard freezes. Im gonna try it over a couple weeks to be 100% certain. WIll update if this problem recurs! I tried that but it doesn't solve it for me. Scrolling volume up or down quickly to max or min almost always locks it up still. Link to comment Share on other sites More sharing options...
GRINDFEST Posted January 21, 2020 Share Posted January 21, 2020 I still have this problem in 2020; it doesn't happen when the polling rate is set to 125 hertz but it occurs at higher polling rates. The past updates to iCUE did not help and neither did reverting to old firmware then updating to the newest firmware update. I also tried reinstalling iCUE and Media Key Handling is disabled on Chrome. Not sure what the problem is at this point. Link to comment Share on other sites More sharing options...
hzrD Posted January 22, 2020 Share Posted January 22, 2020 Is there still no fix for this? I tried disabling Hardware Media Key Handling, but that didn't help unfortunately. Link to comment Share on other sites More sharing options...
gboy Posted January 30, 2020 Share Posted January 30, 2020 (edited) sorry about this, the problem did recur again after like 3 months. I've updated my previous 'fix' post to reflect this issue, but I've also seemed to have great results with setting my polling rate to anything below the maximum (1000hz/1msec) rate. Ive tested the 500hz/2msec polling rate reaaaaaaaally extensively (like 15 minutes of just scrolling the volume wheel up and down). So far 0 freezes. The moment I switch to the max 1000hz/1msec and spam scroll the volume wheel, problem usually recurs within like 30 seconds or less. So, it does seem like polling rate's the issue here. Lets hope it stays that way. Will update all posts if problem recurs. Edited January 30, 2020 by gboy Link to comment Share on other sites More sharing options...
nightreignz Posted February 19, 2020 Share Posted February 19, 2020 Hi its 2020... I have a Corsair K70 RGB MK.2 and I have the volume scrolling issue where it will Freeze up and I have to unplug replug it. Tried everything in this thread but the problem still happens. I just purchased this 4 months ago... is Corsair putting out a fix? Link to comment Share on other sites More sharing options...
nightreignz Posted February 19, 2020 Share Posted February 19, 2020 Just wanted to add, switching the polling rate to below 1000 (500) fixes the issue.. can Logitech fix it so we can use the 1000 pollingrate Link to comment Share on other sites More sharing options...
nightreignz Posted March 4, 2020 Share Posted March 4, 2020 Update: Switching to 500ms polling rate only HELPS the problem is still will freeze once a day Link to comment Share on other sites More sharing options...
diezz Posted April 9, 2020 Share Posted April 9, 2020 (edited) I experience same issue it's really very annoying. I can't believe that till now corsair didn't release a fix for this problem, hope this to be happen soon. Keyboard is very nice and comfortable that why i don't want to replace it with another one. Till now for myself i didn't found a fix or workaround. By the way my keyboard is not a k95, it is k70 mk2, but i think technologies are the same on both keyboards. Edited April 9, 2020 by diezz Link to comment Share on other sites More sharing options...
diezz Posted April 10, 2020 Share Posted April 10, 2020 Ok i think that i got a solution. Seems this keyboard is not compatible with last version on iCue. I just close the iCue and disable it from auto start and keyboard's issue with volume control just gone, till now no issues! Link to comment Share on other sites More sharing options...
Zombernatural Posted May 26, 2020 Share Posted May 26, 2020 I'm having the same issue, for now only unplugging the keyboard works again. Honestly thinking about refunding. Paying 150€ for a product that gets unusable if I happen to change the system volume. Link to comment Share on other sites More sharing options...
vinsdoe Posted May 26, 2020 Share Posted May 26, 2020 (edited) I confirm the problem on my k70 rgb mk.2. Corsair are you thinking of doing anything? 3 years have passed and users are still faced with this problem. Such problems make your brand no better than Chinese keyboards, which are 5 times cheaper. Edited May 26, 2020 by vinsdoe mistake Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now