Search the Community
Showing results for tags 'custom liquid cooling'.
Found 4 results
-
Hey all! I have another question. As of right now i'm finally finalizing my pc build, everything should be where it is.. one issue however. As of right now, I have the pump's PWN plugged into a Commander Core XT that I bought at Best Buy but when I go into iCue I'm not able to read it's speed or be able to customize it. It's plugged into port 6 of the fans header yet nothing is showing. Hope I can find an answer soon. Thank you so much! -
Hey yall, Just completed my first loop with an XD5 pump res and a cpu block. I do not have a commander pro. I wanted to ask if anyone has experience plugging in the liquid temp sensor into the MOBO and using the bios to set the fan curves/ pump curve to be based of the liquid temperature? sorry this is somewhat of an open question I just want to know if I can manually create the profiles that the commander pro uses, and if there are recommended values to set for the fan curves if doing this. Also want to know if I should leave any of the fans to be set off cpu temp alone. I have just booted it up and been playing around with it for about 60 minutes and my CPU temp has been going form low 40's to mid 50's, spiking then dropping down causing the fans to rev up every couple of minutes. my main goal is to get this to stabilize and be more constant. -
Hi, I have an RTX 3080 and an I7-9700k. My GPU is currently air cooled and the CPU is using an AIO from Corsair. I have been planning on upgrading to a custom loop using Hydro X - both CPU and GPU. I wanted to know if it’s sufficient to be using 2 x 280mm radiators for cooling. The plan is to have one 280mm rad at the top as an exhaust. And another 280mm rad at the bottom as an intake. I have a Corsair 680x case, with 3 x QL120 intake fans at the front, and 1 x QL140 exhaust fan at the back.
-
Could someone more experienced and with more knowledge make me a diagram picture thingie for how everything is conected. Needed in diagram: What fans should go to what rgb fan led hub and commander. how to chain everything that can go in a chain. Different colors for different cable types. Legend so i know what color is what. can i put commander ontop of eachother or will they be too hot for that to be smart? Can i get ahold of extension cables for the fans and their rgb lightning that doesnt cost like 10bucks a cable or should i just place the commanders in the closest spots? I cant get ahold of the y header cables as they are out of stock everytime i check. -------------------------------------------------------------------------------------- This is the items that i have and can use: 18 LL120 fans (16 in the front 2 in the back) 3 LL140 fans in the top. 3 Commander Pros (included the one preinstalled in case) 3 RGB Fan Led Hub (included the one preinstalled in case) 2 2080 Waterblocks with rgb lighting (Has input and output so can be used in chain. 1 i9 9900KF waterblock with rgb lighting (only one cable for rgb no chain thingies) 1 XD5 RGB pump/reservoir (input and output for RGB and one 4pin pump connector cable) Motherboard : MSI Z390 MEG ACE -------------------------------------------------------------------------------------- I want a diagram as im having a hard time following text guides and its so much easier to do it in the actuall case with a diagram. I know there are plenty of similar diagrams out there but i cant understand where to connect the stuff that i have thats not in those builds so thats why i need this aswell. Edit: I will need to buy some more stuff for sure but a diagram would be useful so i dont buy to much stuff Edit 2: https://imgur.com/IXrnSaj will this work or did i just waste one hour? Edit 3: Looks like my diagram would work! Thanks in Advance!
