Benzine Posted August 18, 2019 Share Posted August 18, 2019 Hey guys. So I have just completed a new build from almost 100% scratch (only kept SSDs). Fired it up, everything is working fine except the CPU cooler. I have been troubleshooting all weekend and the only conclusion I can come up with is it is a faulty cooler. When plugged into a usb 2.0 header or a 2.0 usb from the motherboard I/O I get a port reset failure in device manager. When plugged into a 3.0 on the I/O I get device descriptor request failed. I have tried updating the drivers, disabling the usb power settings, disconnecting and reconnecting. Updated my BIOS, updated Generic usb. Updated everything. I have set cpu_fan power to full speed in BIOS. I have power going to the cooler because I have RGBs lighting up on the fans and cooler. It wont show up in my iCue. I have tried unplugging every other USB. My build is in my profile. Any other things to try? Starting to feel a little defeated. Link to comment Share on other sites More sharing options...
Recommended Posts