Willeponken Posted October 6, 2014 Share Posted October 6, 2014 Hi Community! I recently tried to update my firmware on my h80i by using the official version. It gave me a positive message in the CorsairLink software, but ultimately bricked my H80i. I am guessing that I can't do anything about it and have to do a warrant claim. Or might there be something I can do? The fans are spinning, but it is unrecognizable by the computer and the LED is not working. :eek: Best regards Link to comment Share on other sites More sharing options...
Toasted Posted October 6, 2014 Share Posted October 6, 2014 Have you tried a mini USB B to Type A cable? Is the device seen as Integrated USB Bridge in Devices and Printers? If it's there, you might be able to recover the device by flashing the recovery firmware then the H80i firmware again. Link to comment Share on other sites More sharing options...
Willeponken Posted October 9, 2014 Author Share Posted October 9, 2014 Thank you for the answer! I will try this and report further on the matter of my success or failure! Link to comment Share on other sites More sharing options...
red-ray Posted October 11, 2014 Share Posted October 11, 2014 Is the device visible on the USB Bus? What does my SIV (http://rh-software.com/) report when you press the [uSB Bus] button? Post a screen shot. Link to comment Share on other sites More sharing options...
Willeponken Posted October 23, 2014 Author Share Posted October 23, 2014 Hi Red-ray! Thank you for your answer! I have now tried connecting the device through a regular USB-port instead of the one on the motherboard. This is the result using your program. http://imgur.com/i5N8g1S Link to comment Share on other sites More sharing options...
red-ray Posted October 24, 2014 Share Posted October 24, 2014 The image does not show but I managed to see it my looking at http://i.imgur.com/i5N8g1S.png. http://i.imgur.com/i5N8g1S.png The H80i is not reported by Windows so there is a HW issue. There needs to be a Corsair Integrated USB Bridge reported as it was on the [uSB Bus] page on http://rh-software.com/. Link to comment Share on other sites More sharing options...
Willeponken Posted October 26, 2014 Author Share Posted October 26, 2014 The image does not show but I managed to see it my looking at http://i.imgur.com/i5N8g1S.png. The H80i is not reported by Windows so there is a HW issue. There needs to be a Corsair Integrated USB Bridge reported it it was as on the [uSB Bus] page on http://rh-software.com/. This "Corsair Integrated USB Bridge" cannot be detected. I cannot find when I look at the USB devices. What do you suggest I try? Thank you very much for your time and help! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted October 27, 2014 Corsair Employee Share Posted October 27, 2014 Definitely RMA time. Please contact our tech support and we'll get it replaced for you. Link to comment Share on other sites More sharing options...
red-ray Posted October 29, 2014 Share Posted October 29, 2014 This "Corsair Integrated USB Bridge" cannot be detected. I cannot find when I look at the USB devices. What do you suggest I try? Has it ever been detected? What does [Link Devices] report? I too suspect it's RMA time. Link to comment Share on other sites More sharing options...
Willeponken Posted November 6, 2014 Author Share Posted November 6, 2014 Definitely RMA time. Please contact our tech support and we'll get it replaced for you. Alright. So I will have to re-package it as it were with all the components that came along, or is it sufficient with just the broken pump and a receit? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.