The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Cooling (https://forum.corsair.com/forums/forumdisplay.php?f=155)
-   -   Best way to connect H100i V2 on Gigabyte Z390 Aorus (https://forum.corsair.com/forums/showthread.php?t=184492)

likearocket 01-13-2019 10:55 AM

Best way to connect H100i V2 on Gigabyte Z390 Aorus
 
Hello. Can someone advise the best way to connect and control a H100i v2 AIO on a Gigabyte Z390 Aorus? I currently have it connected to the CPU_FAN header with the two fans connected to the pump. These are my settings in the BIOS:

CPU Fan Speed Control: Full Speed
Fan Control Use Temperature Input: CPU
CPU Fan Control Mode: PWM

Can someone confirm these are the correct settings to supply 12V to the pump and allow full control of the fans?

Thanks in advance!

c-attack 01-13-2019 12:00 PM

Yes, that's fine. As long as the BIOS fan controls don't try to reduce the speed (and thus the voltage to the cooler), you are good.


All times are GMT -4. The time now is 09:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.