CryWolf Posted May 20, 2019 Share Posted May 20, 2019 Hello guys, I've been using 5 LL fans of 140mm on my system for about a month now. They are all connected on the Lighting Node Pro that came with the 3 fan pack running the Firmware version 0.7.122. iCUE version is 3.15.101. When I turn my computer on they behave normally, first lighting white, which is the color I set up to run the LL fans when the iCue is not running, and then, when the computer logs in, my color profile works just fine. The problem is that, after some time using the computer, randomly the colors from my profile stops to work and all LL fans turns white. When this happens I noticed that iCue still recognizes the Lighting Node Pro but it doesn't respond to anything I try to change. I tried changing profiles, updating firmware, closing and opening again the iCue, reseting iCue service and even uninstalling and installing again the iCue. Nothing works... Randomly the colors change to white and and only works again if I restart the computer. It is important to note that my motherboard only have 2 USB 2 ports, 1 is using for the H115i and the other one I'm using for the NZXT Internal USB HUB, on which I'm using to plug the Lighting Node Pro and my frontal USB 2 ports. I'm only using it because Corsair requires a Internal USB 2 port for each hardware you buy, which is sad... Please, help me with this problem and sorry for any english mistake, english is not my native language. Thank you all. :biggrin: Link to comment Share on other sites More sharing options...
Zotty Posted May 21, 2019 Share Posted May 21, 2019 when it happens.... what happens if you go into settings a restart corsair service?. another thing to try is run the node pro to your rear IO,, does the problem stop? if so,,, look at the NZXT hub....... Link to comment Share on other sites More sharing options...
gtstarwars Posted May 21, 2019 Share Posted May 21, 2019 Hello guys, I've been using 5 LL fans of 140mm on my system for about a month now. They are all connected on the Lighting Node Pro that came with the 3 fan pack running the Firmware version 0.7.122. iCUE version is 3.15.101. When I turn my computer on they behave normally, first lighting white, which is the color I set up to run the LL fans when the iCue is not running, and then, when the computer logs in, my color profile works just fine. The problem is that, after some time using the computer, randomly the colors from my profile stops to work and all LL fans turns white. When this happens I noticed that iCue still recognizes the Lighting Node Pro but it doesn't respond to anything I try to change. I tried changing profiles, updating firmware, closing and opening again the iCue, reseting iCue service and even uninstalling and installing again the iCue. Nothing works... Randomly the colors change to white and and only works again if I restart the computer. It is important to note that my motherboard only have 2 USB 2 ports, 1 is using for the H115i and the other one I'm using for the NZXT Internal USB HUB, on which I'm using to plug the Lighting Node Pro and my frontal USB 2 ports. I'm only using it because Corsair requires a Internal USB 2 port for each hardware you buy, which is sad... Please, help me with this problem and sorry for any english mistake, english is not my native language. Thank you all. :biggrin: Hey there, Have you tried plugging the node pro directly into the motherboard? It could be a faulty hub if so. leave the h115i plugged in and disconnect the front io port usb and just plug in the node pro to motherboard to determine if it is a faulty usb hub. That being said some notes to remember, the LL140s only come in a 2 pack, are you sure you didnt buy a triple pack LL120? The RGB LED hub will have no issues with the 120 + 140 fans as they have same number LEDs but as they are on a chain, if one fails, the rest are unable to work because one of them stopped passing the signal. Link to comment Share on other sites More sharing options...
CryWolf Posted May 23, 2019 Author Share Posted May 23, 2019 when it happens.... what happens if you go into settings a restart corsair service?. another thing to try is run the node pro to your rear IO,, does the problem stop? if so,,, look at the NZXT hub....... Hello :) If I restart the iCue service the node pro doesn't show any more on the iCue. It is like the node pro stopped working at all. I didn't understand what you meant by plugging the node pro on the rear IO. Is this even possible? The USB 2.0 cabe that comes with it doesn't plug in normal usb 2.0, only the internal usb 2.0. Hey there, Have you tried plugging the node pro directly into the motherboard? It could be a faulty hub if so. leave the h115i plugged in and disconnect the front io port usb and just plug in the node pro to motherboard to determine if it is a faulty usb hub. That being said some notes to remember, the LL140s only come in a 2 pack, are you sure you didnt buy a triple pack LL120? The RGB LED hub will have no issues with the 120 + 140 fans as they have same number LEDs but as they are on a chain, if one fails, the rest are unable to work because one of them stopped passing the signal. I didn't try that. I will try it if the problem comes back. After I unninstalled and installed again the iCue and, at the same time, changed the USB 2.0 port that I was using in the NZXT hub for the node pro, the problem seems to be solved. Sorry about the wrong information. I did buy a LL 140 twin pack and 3 more others. They are all 140mm. Thank you all for the information. For now, the problem is solved. If it comes back I will test it directly on the USB 2.0 of the MOBO to check for a faulty NZXT hub. But, if it persists, I will let you guys know. Thank you all :) Link to comment Share on other sites More sharing options...
Zotty Posted May 23, 2019 Share Posted May 23, 2019 Hello :) If I restart the iCue service the node pro doesn't show any more on the iCue. It is like the node pro stopped working at all. I didn't understand what you meant by plugging the node pro on the rear IO. Is this even possible? The USB 2.0 cabe that comes with it doesn't plug in normal usb 2.0, only the internal usb 2.0. using a normal Mini USB cable.. yet it's possible buddy, just trying to cancel out the usb port being an issue Link to comment Share on other sites More sharing options...
CryWolf Posted May 27, 2019 Author Share Posted May 27, 2019 using a normal Mini USB cable.. yet it's possible buddy, just trying to cancel out the usb port being an issue Nice! I didn't know that this was possible. Thank you for the idea. If the problem comes back I will do that. Link to comment Share on other sites More sharing options...
Recommended Posts