reyfernan32 Posted April 20, 2012 Share Posted April 20, 2012 I have 2x4GB CMZ8GX3M2A1600C9B. May I know if dual channel mode will work in this board http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77_WS ? I've search in configurator and it is not listed. http://www2.corsair.com/configurator/memory_results.aspx?id=1932838 Thanks. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted April 20, 2012 Corsair Employee Share Posted April 20, 2012 Yes these modules will work great with that MB, we will be adding MB's over the next few weeks. Link to comment Share on other sites More sharing options...
reyfernan32 Posted April 21, 2012 Author Share Posted April 21, 2012 May I know if dual channel mode will work in this board also http://ph.asus.com/Motherboards/Intel_Socket_1155/P8Z77M_PRO/ ? Thanks. Link to comment Share on other sites More sharing options...
Wired Posted April 21, 2012 Share Posted April 21, 2012 Dual channel mode is dependent on the CPU's memory controller, but basically any CPU / motherboard made in the past couple of years can do dual channel. Link to comment Share on other sites More sharing options...
Bitgod Posted April 21, 2012 Share Posted April 21, 2012 It usually takes a little time for the new stuff to show up. I'd start off by checking out the manual for the mobo you're interested in to see if they list compatibility. That's what I ended up doing when I was looking at one of the ASUS mobos, they had a compatibility list and I went with the RAM they mentioned. Which worked out since it was the RAM I wanted anyway. Link to comment Share on other sites More sharing options...
MaFi0s0 Posted April 23, 2012 Share Posted April 23, 2012 Can I use the Dominator GT RAM in z77 motherboards? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted April 24, 2012 Corsair Employee Share Posted April 24, 2012 Its up to you but remember that most Sandy bridge chipsets and CPU's suggest using only 1.5 Volt memory. Link to comment Share on other sites More sharing options...
MaFi0s0 Posted April 26, 2012 Share Posted April 26, 2012 Thanks :) I am going with the 1.5v PC17000 for that reason. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.