wytnyt Posted December 6, 2013 Share Posted December 6, 2013 I have my first component on its way for a custom loop build that i plan on building here as i proceed the reason i call it ''Grease-Monkey'' is because ill lack all the high tech tools needed but will be doing this build mostly by hand-as in old school anyways heres my first bought component. http://www.newegg.com/Product/Product.aspx?Item=N82E16819116939 Link to comment Share on other sites More sharing options...
wytnyt Posted December 13, 2013 Author Share Posted December 13, 2013 update as i compile my parts build Link to comment Share on other sites More sharing options...
HOODedAssault Posted December 13, 2013 Share Posted December 13, 2013 Nice man. Can't wait to see some pics. Be pretty close to my build if I didn't sell off my 2011 socket stuff. Really thinking of grabbing a 4930k but knowing my luck 8 cores will come out the next day :roll: Link to comment Share on other sites More sharing options...
wa3pnt Posted December 13, 2013 Share Posted December 13, 2013 Well, if we're sharing our parts collections, here's a list of what I have on hand so far: AlphaCool Light Tower AMD FX8350 4GHz CPU Aquaero 6 XT Controller Aquaero 6 XT Console AquaStream XT USB Pump (Ultra Version) ASUS Crosshair V Formula (-Z) Motherboard Corsair Air 540 Case Corsair ax860i PSU EK Chipset Cooling Block EK AMD CPU Cooling Block EK GPU Cooling Block Bitspower RAM Cooling Block G.Skill Ripjaws RAM (32GB) Koolance N17 Flow Meter (two) Swiftech MCR-220-DRIVE-REV3 Radiator/Reservoir/Pump Swiftech MCR-320-QP Radiator NZXT IU01 Internal USB Hub Plextor M5P Xtreme 256GB SSDs (three) PrimoChill Clear Rigid Tubing (a bunch for screw ups) PrimoChill Rigid Tubing Fittings (28 each - you can never have too many fittings) Drawer full of Bitpower G1/4 Fittings Phobya Thermal Sensors (three) Gelid GC-3 Extreme TIM Here's a link (I hope) to an album that has the pictures: http://tinypic.com/a/2tf7b/3 And the beat goes on. AND the bank account dwindles. LOL RodeoGeorge OBTW, wytnyt, the MCR220-DRIVE does fit (barely) in the top of the 540. Link to comment Share on other sites More sharing options...
wytnyt Posted December 14, 2013 Author Share Posted December 14, 2013 i was hoping to finally posting some build progress but another setback ,,, need to make yet another modification to the front 360 rad. this 540 case is dangerously getting close to being replaced by a larger case:(: Link to comment Share on other sites More sharing options...
wytnyt Posted March 9, 2014 Author Share Posted March 9, 2014 Finally am seeing light at the end of the tunnel and thought id post my build specs today and within the week will post pics of cutting and modding a 360 push/pull in the front and a 240 push on top here are my basic build specs Corsair Air 540 Case Intel i7-4930K LGA 2011 ASUS P9X79 PRO LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA GeForce GTX780 SuperClocked w/EVGA ACX Cooler 3GB GDDR5 384bit Dominator® Platinum 8 ea. 4Gig x CMD16GX3M4A2133C9 4x 128 Gig Ssd's w/ 1 ea. 1Tb Hybrid Drive 2x 2tb Standard Hdd's LG Electronics 14x SATA Blu-ray Internal Rewriter 10 x Ea. Corsair Air Series SP120 PWM High Performance Edition Fans AX760i Platinum Certified Fully-Modular PSU Corsair Link Cooling and Lighting Kit My Water Cooling List Currently Consists of; EK D5 X-RES Top 140 w/ D5 Vario Pump (EK-D5 Vario X-RES 140 (incl. pump)) XSPC RayStorm High Performance Acetal CPU Liquid Cooling Block - Intel EVGA GeForce GTX 780 Hydro Copper Waterblock (400-CU-G780-B1) EVGA GeForce GTX 780 Backplate (100-PB-2780-B9) Black Ice GT Stealth 360 Radiator - Black Alphacool NexXxoS ST30 Full Copper Slim Profile Dual 120mm Radiator PVC Rubber Grommet - 0.625" I.D. Hole PrimoChilll 1/2" OD Rigid Revolver Coupler Diamond Knurled Fitting - Single - Anodized Blue PrimoChilll 1/2" OD Rigid Tubing Bending Kit PrimoChilll 1/2" OD Rigid Acrylic Tube - 4x 24" Pack - Dark Blue PrimoChilll 1/2" OD Rigid Revolver Compression Straight Knurled Fittings - 10 Pack - Anodized Blue Primochill Fillport/Pass Thru Connector - Brass Nickel Plated FrozenCPU Lighted Crystal LED Plug - Blue - (3 Pin) Monsoon .999 Fine Silver Bullet Antimicrobial G 1/4 Plug - Blue (MON-PLUG-AG-BL) Bitspower G 1/4" Temperature Sensor Stop Fitting - Matte Black (BP-MBWP-CT) Phobya G1/4" Temperature Sensor with C/F Display - (71177) XSPC G1/4" 3-Way T Adapter - Chrome Alphacool G1/4 90° Double Rotary Fitting Adapter Male to Female - Deep Black 4 Ea. Bitspower G 1/4" Temperature Sensor Stop Fitting (BP-WTP-CT) 2 Ea.Bitspower G1/4 Thread 3/8" ID x 1/2" OD 90-Degree Rotary Compression Fitting - Matte Black (BP-MB90R2LCPF-CC2) With my workload easing up due to warmer weather approaching,hopefully i can dedicate more than 5-10 minutes at a time building this... Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 10, 2014 Share Posted March 10, 2014 Looks like a great build. Only thing thats a little iffy to me is the motherboard. Theres newer asus motherboards like mine that solve some of the issues the original x79 boards had. Like vrm throttling when overclocking and stuff. 4930k should be alright as itll use less power than the 3930k I was using. As long as your not going for like 1.4v+ it shouldnt be an issue anyways. I simply placed a 80mm fan above the vrm hs. Or since you've already spent so much anyways. http://www.frozencpu.com/products/14589/ex-blc-1021/Heatkiller_MB-SET_ASUS_P9X79_-_Full_Coverage_Water_Block_Kit_-_Nickel_Top_11432.html Link to comment Share on other sites More sharing options...
wytnyt Posted March 10, 2014 Author Share Posted March 10, 2014 i looked at those chipset coolers alot but i just dont trust how they mount up,but may still get them later on,,but this build is just for internet browsing anyways:D: my son is calling this my career build.:(: Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 10, 2014 Share Posted March 10, 2014 I personally would only use the vrm block. The other seams to have issues with mounting from what I've read but vrm one is fine. edit: looky what I found. http://www.ekwb.com/shop/blocks/motherboard-blocks/mosfet-blocks/intel-x79-series/ek-mosfet-asus-x79-en-nickel.html Link to comment Share on other sites More sharing options...
wytnyt Posted March 15, 2014 Author Share Posted March 15, 2014 Finally after waiting for my workload to slow down and gathering parts I am actually beginning to make a little progress on my build first let me say that while most builds show the eye candy shots [what we all want to see] Ive decided to post both ends of the build,that being the money shots and also pics of my build as i progress even showing the ''bloopers'' along the way:D: Hopefully i can show other potential builders a few good idea's;): on how to do their build and even more important....what not to do heres a couple shots of my rads after scuffing and fan rings http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2935_zpsf89393d5.jpg i only had a 2 hour window being able to use the paint booth which included setting up,painting and having the parts out http://i39.photobucket.com/albums/e152/wytnyt123/IMGA0011_zps622a6a83.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2936_zpse76741ea.jpg' alt='IMG_2936_zpse76741ea.jpg'> http://i39.photobucket.com/albums/e152/wytnyt123/IMGA0007_zpsba760096.jpg http://i39.photobucket.com/albums/e152/wytnyt123/29625_zps6e841204.jpg even tho i used an accelerate to speed dry the paint,i found when moving the parts they were still somewhat soft and tacky http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2964_zpsc6317796.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2963_zps152fe406.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2962_zpsc9a73885.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2960_zps88474c8d.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2959_zpsb3819105.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2957_zps93d28917.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2954_zps12c3c084.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2952_zps473eeb72.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2951_zpsdc39e964.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2970_zps34e0f09c.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2969_zps6b0bad6d.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2967_zps199af04f.jpg http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2965_zpsdfc30564.jpg http://i39.photobucket.com/albums/e152/wytnyt123/29625_zps1ae28405.jpg you can notice that underneath the fan screws there is no paint as i didn't want the radiator cores to have any restriction due to the painting so i sprayed from the outer sides towards the center of the radiator ... Link to comment Share on other sites More sharing options...
wytnyt Posted March 15, 2014 Author Share Posted March 15, 2014 ok,as promised allow me to show my biggest duh moment blooper so far but first let me say ive done paint/body work since '78 and have worked on most everything made i reduced my 2 5.25 drives down to 1 1/4 bays and decided to rattle can it a semi-black,,i bought a couple good brand of paint so here i go doing the usual shake rattle routine to mix the paint,then decided to go get a glass of tea before spraying once spraying and having dried it came out as shown trying to figure what went wrong i realized http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2934_zpsec587b3f.jpg I picked up the wrong can and not the one i shook up:o: Link to comment Share on other sites More sharing options...
wytnyt Posted March 16, 2014 Author Share Posted March 16, 2014 I have another small mod being done to the Psu location as i need to move it in order for the chamber side sheet metal to properly align. this will also give well needed space to tuck away all of the rat nest wiring I decided to glue the metal instead of other available methods.the particular bonding i used is called Fusior,which bonds so well if pulled hard enough the sheet metal will rip before the glue separates... here i scratched the paint to provide good adhesion ... http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2926_zpsf55101f0.jpg I taped the underside to avoid any dripping of the glue and also keeps a smoother surface for less sanding when dry http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2927_zps0cffac10.jpg placing the metal and pressure clamping it my pliers couldn't get the proper bite so i added a ''specialty'' tool designed for this purpose ;): http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2932_zpse4c6606c.jpg a very important step to note is to make sure the tips of the pliers have been lubricated to avoid being bonded also,I used Vaseline... Link to comment Share on other sites More sharing options...
wytnyt Posted March 18, 2014 Author Share Posted March 18, 2014 Ive got another small step done i thought id share this pic is the upper fans where it was cut out.,Ive realized that most any cutting here really weakens the case structure. Initially i had planned on using 2 straight angled brackets but that would have have put the integrity of the case right to the radiator. http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2997_zps367f2cfe.jpg so I came up with bracket below and must say the case is likely stronger than ever http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2800_zps2d50d564.jpg heres a shot of the front fan cutout,,I'm using a flat brackets here ,fortunately as the isn't enough room for an enclosed one http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2998_zpsb4a4ff78.jpg this is the front fan bracket http://i39.photobucket.com/albums/e152/wytnyt123/IMG_2955_zpsad5b000b.jpg heres a pic of moving the Psu 5/16'',I must say getting these screw holes has been the hardest 1's so far http://i39.photobucket.com/albums/e152/wytnyt123/IMG_3000_zps6bec8f22.jpg Im still debating on if I should smooth the Psu area more,,,but it is the case rear;): Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 18, 2014 Share Posted March 18, 2014 Just paint whole back of case flat black so u don't see the imperfections. Link to comment Share on other sites More sharing options...
wytnyt Posted March 19, 2014 Author Share Posted March 19, 2014 Just paint whole back of case flat black so u don't see the imperfections. looking at it,you could never tell ive painted for many years:(: im just anxious to get it running Link to comment Share on other sites More sharing options...
thenosbod Posted March 19, 2014 Share Posted March 19, 2014 Its looking good. Link to comment Share on other sites More sharing options...
wytnyt Posted March 22, 2014 Author Share Posted March 22, 2014 we have lift off:D: i wanted to get everything running on air before i go on water had a good time getting the 780 to work but its purring now will get link,fans,hdds and all in soon http://i39.photobucket.com/albums/e152/wytnyt123/IMG_3025_zpsb3b8d08b.jpg Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 22, 2014 Share Posted March 22, 2014 Nice ! Where did that cooler come from ? You have to bump vccio to get all that ram going ? What was the issue with the 780 ? So many questions ??? lol Link to comment Share on other sites More sharing options...
wytnyt Posted March 22, 2014 Author Share Posted March 22, 2014 all i did to get the memory purring was enable xmp,the 780 had no video and ended up having to do a bios update but had me stumped till i connected my other video card and had the same results.the cpu fan is a $20 el cheapo i got just to get everything done before going to water. matches tho huh:D: Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 22, 2014 Share Posted March 22, 2014 Lol made me look twice because I didn't even think intel made coolers for x79. Or do they come with 3820 or something ? I know 4820k and 3930k don't because I've owned them... You better check your vccio voltage or cpuvtt. Whatever it's called in your bios. When i enable xmp my cpuvtt goes to 1.3v and as far as i see more than 1.25v is not safe. I'm running mine at 2400 with 1.1v. You have more sticks tho so you may need a bit more. Don't want you to fry that cpu because of asus wonderful auto settings lol. Link to comment Share on other sites More sharing options...
wytnyt Posted March 27, 2014 Author Share Posted March 27, 2014 Got a little ''what is it'' for the avid builder let me say this,it has to do with leds and as shown in the pic by the black line this is where ill be cutting it to make 2 ''items'' one pic is topside and the other is the underside of course its unfinished and fresh out of a fiberglass mold. http://i39.photobucket.com/albums/e152/wytnyt123/fiberglass_zpsc0f3baf8.jpg Link to comment Share on other sites More sharing options...
wytnyt Posted March 30, 2014 Author Share Posted March 30, 2014 :D: ok, so its a ''hood'' to cover the chamber side leds that highlights the 2 Evo 240 ssd's that im putting there. i thought guessing it would be easy...:confused: ordered 2 of these at 9 pm and lightning fast delivery got em here already:D: http://ecx.images-amazon.com/images/I/41sEN40QhML.jpg Link to comment Share on other sites More sharing options...
wytnyt Posted April 5, 2014 Author Share Posted April 5, 2014 finally had a few minutes to work on my build so i figured id accomplish the hardest most painstaking part of this entire build the mounting of the Link Commander:D: http://i39.photobucket.com/albums/e152/wytnyt123/IMG_3034_zps607fc311.jpg getting the wiring isolated enough to have room for the res and pump was tricky but having the 5/16'' of space behind the PSU made it all possible.. the only wiring left is the Link nodes,this build has 3 ssd's and 2 front side full drives I cant secure the ssd's till Ive painted the upper panel so I figured Id do my dual boot and get the drives in a Raid easy sit down work...;): Link to comment Share on other sites More sharing options...
wytnyt Posted April 9, 2014 Author Share Posted April 9, 2014 got 2 more Evo's coming,,maybe ill break 1g read? http://i39.photobucket.com/albums/e152/wytnyt123/Untitled_zps6c752013.png Link to comment Share on other sites More sharing options...
Pixelmancer Posted April 10, 2014 Share Posted April 10, 2014 I have my first component on its way for a custom loop build that i plan on building here as i proceed the reason i call it ''Grease-Monkey'' is because ill lack all the high tech tools needed but will be doing this build mostly by hand-as in old school anyways heres my first bought component. http://www.newegg.com/Product/Product.aspx?Item=N82E16819116939 High tech tools? You mean a screwdriver? :bigeyes: Nice radiator paint by the way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.