dpotter Posted January 21, 2012 Share Posted January 21, 2012 Just Installed my Corsair Link and am getting the message to upgrade the firmware to H80 to 1.1. Anyone know where download this and upgrade to 1.1? Thanks David Link to comment Share on other sites More sharing options...
dpotter Posted January 21, 2012 Author Share Posted January 21, 2012 I found the download and update info. It was a tools option in the Corsair Link Software. David. Link to comment Share on other sites More sharing options...
Noms Posted March 7, 2012 Share Posted March 7, 2012 Hi, Same problem here. It says me to upgrade my h80 to firmware 1.1 Im in Device Management (Corsair Link Tools) and i see: H80; Address 1; Firmware 1.0.13; No update Info. When i try "Firmware Update", i choose the device "Corsair H80" but it seems that i have to provide a firmware file. Where can i download this file? Thx! Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 8, 2012 Corsair Employee Share Posted March 8, 2012 There is no update at this time just ignore the message for the time being. Link to comment Share on other sites More sharing options...
Noms Posted March 8, 2012 Share Posted March 8, 2012 OK, but the fans and/or the pump of the h80 are not being showed in Corsair Link Sensors and Devices. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 8, 2012 Corsair Employee Share Posted March 8, 2012 Do you have the latest software Version 1.2.5 installed? I am checking into this and will get back with once I have confirmed a few things. you have the cable connected to the H80 from the corsair Link correct? I mean you were able to read the firmware in a previous post right? Link to comment Share on other sites More sharing options...
Noms Posted March 9, 2012 Share Posted March 9, 2012 Yeah, i have the cable connected from the h80 to the corsair link. Corsair link [soft version 1.2.5.0] detects everything i have plug in it (Corsair Commander with firm. 1.1.9: Cooling node in address 2 [firm 1.1.12], Lighting node in address 3 [firm. 1.1.9] and H80 in Address 1 [firm. 1.0.13]) Each time i start Corsair link, a popup says to update the firm of the H80 to 1.1 In Devices, im able to see the 2 200mms fans of the 600T, all the temps (CPU, GPU, HDDs...) but nothing about the H80, not pump or fans. Link to comment Share on other sites More sharing options...
SpDFrek Posted March 9, 2012 Share Posted March 9, 2012 You will need to update to CorsairHydro1.1.12 in order for your H80 to be controlled by Corsair Link. Under the "Device Management" option you will find a "Check for Updates" button. Select that and a "Download" button will appear on the H80 (or H100 if you have one) box. Select the download button and it will prompt you to save the file to your computer. Once you have downloaded the file you can update the firmware via the device management (edit: took out "mismanagement". Typo. Funny, but a typo) pane. Link to comment Share on other sites More sharing options...
Noms Posted March 10, 2012 Share Posted March 10, 2012 Thanks for your answer,SpDFre@k. That is the problem, that i dont get the link to download the firmware. When i check for updates, i get the message "No update Info" for H80, but no Download button or link is showed. And the rest of the equipment is "Up to Date". And every time i started Corsair Link, i get the pop up of "Update firmw of H80 to 1.1" =( Link to comment Share on other sites More sharing options...
SpDFrek Posted March 12, 2012 Share Posted March 12, 2012 Thanks for your answer,SpDFre@k. That is the problem, that i dont get the link to download the firmware. When i check for updates, i get the message "No update Info" for H80, but no Download button or link is showed. And the rest of the equipment is "Up to Date". And every time i started Corsair Link, i get the pop up of "Update firmw of H80 to 1.1" =( File attached. Yeah, that sucks its not seeing the update for you. Download and upzip. Once updated you should have control of the H80.CorsairLinkHydroFW_1.1.12.zip Link to comment Share on other sites More sharing options...
Noms Posted March 13, 2012 Share Posted March 13, 2012 Yeah, THX SpDFre@k!!!. Updated and now working perfect, I can see H80 temps and pump and fans rpms. Thx for your help RAM GUY too! Link to comment Share on other sites More sharing options...
randolla Posted March 13, 2012 Share Posted March 13, 2012 Sometimes not seeing a download can be a browser problem. Sometimes I need to use Google Chrome instead of IE to see certain pages and downloads on the Corsair website. Try a different browser if you have problems. Link to comment Share on other sites More sharing options...
Noms Posted March 15, 2012 Share Posted March 15, 2012 Thx Randolla, but it was not a problem of the browser. I was not able to see the link with Corsair Link Software. There are several buttons to download the updated firmware, but mine was not showing anything. Link to comment Share on other sites More sharing options...
frankie70 Posted May 6, 2012 Share Posted May 6, 2012 Hi, I have the same "problem". I install my new H100, everything is ok, i install the fan cable in the pump, and the h100 is connected in the corsair link. Everything ok, but when i open the program getting the message to upgrade the firmware to H100 to 1.1. Ok, i can ignore this, but the fans and/or the pump of the h100 are not being showed in Corsair Link Sensors and Devices. The firmware file posted by SpDFre@k the 12 march is ok also for H100 or only for the H80 ? Link to comment Share on other sites More sharing options...
bee144 Posted May 17, 2012 Share Posted May 17, 2012 Hi, I have the same "problem". I install my new H100, everything is ok, i install the fan cable in the pump, and the h100 is connected in the corsair link. Everything ok, but when i open the program getting the message to upgrade the firmware to H100 to 1.1. Ok, i can ignore this, but the fans and/or the pump of the h100 are not being showed in Corsair Link Sensors and Devices. The firmware file posted by SpDFre@k the 12 march is ok also for H100 or only for the H80 ? I had the problem with mine saying no update info. I used the file in the form for my H100 and it worked. I now have full control of my H100 in Link. Link to comment Share on other sites More sharing options...
frankie70 Posted May 17, 2012 Share Posted May 17, 2012 Yes,thank you, i update my H100 now, everything is perfect. Link to comment Share on other sites More sharing options...
evan748 Posted June 1, 2012 Share Posted June 1, 2012 Hello, I have this "update to 1.1 popup"/no hydro info displayed problem" I've downloaded the file from the previous page but being dumb i dont know how to apply it? Help appreciated =) Link to comment Share on other sites More sharing options...
frankie70 Posted June 1, 2012 Share Posted June 1, 2012 You go to "tool"--"device management"--"update firmware" , you choose the device and the file and press start, 10 seconds and update is finished. Link to comment Share on other sites More sharing options...
evan748 Posted June 2, 2012 Share Posted June 2, 2012 You go to "tool"--"device management"--"update firmware" , you choose the device and the file and press start, 10 seconds and update is finished. Thank you. Done and now the H100 is showing up =) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.