Kevinobi Posted January 29, 2011 Share Posted January 29, 2011 Hello, I just installed the 3x4GB memory kit and activated the XMP profile. Here are the values (Profile #1): Profile info : 1600MHz-9-9-9-24-2N-1.50V-1.35V BCLK Frequency : 133 PCIE Frequency : 100 DRAM Frequency : DDR3-1600Mhz DRAM Timing > 9-9-9-24-2N (everything else auto) QPI/DRAM Core Voltage : 1.40 :confused: DRAM Bus Voltage : 1.50 I'm really worried about the QPI/DRAM Core Voltage value ! Should I change something ? (QPI/DRAM value back to 1.35 ?) Link to comment Share on other sites More sharing options...
Synthohol Posted January 29, 2011 Share Posted January 29, 2011 the fun of being an enthusiast is trying different settings for best results. i would suggest a system stressing program like prime or even memtest to see if lower voltage is just as stable. Link to comment Share on other sites More sharing options...
Kevinobi Posted January 29, 2011 Author Share Posted January 29, 2011 I going to play a bit, but not today :D So you're telling me that 1.4 is not an heresy (or that I'm not going to burn my whole house) ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.