Pezhan Posted November 13, 2019 Share Posted November 13, 2019 Hi! I have tried to configure profiles for the PSU fan but without success, the fan stays between 0-400 RPM, but when configuring 100% it does nothing. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted November 13, 2019 Corsair Employee Share Posted November 13, 2019 Once you have selected the profile you want to use you need to then select the fan. More specifically you need to click on the fan you outlined in red that is right next to the picture of the PSU. Link to comment Share on other sites More sharing options...
c-attack Posted November 14, 2019 Share Posted November 14, 2019 As above. The fan inside your red ringed box will turn yellow when a custom fan curve is applied. Also, be aware that when waking from sleep, the AX1200i will revert to its default fan curve, no matter what you have selected. You cannot force it back through iCUE. You must either restart the PC or disconnect/reconnect the USB from PSU to Motherboard. Link to comment Share on other sites More sharing options...
Pezhan Posted November 14, 2019 Author Share Posted November 14, 2019 Once you have selected the profile you want to use you need to then select the fan. More specifically you need to click on the fan you outlined in red that is right next to the picture of the PSU. Nice, it works!! Link to comment Share on other sites More sharing options...
Pezhan Posted May 9, 2020 Author Share Posted May 9, 2020 iCUE dont work good... I have same problem, i set 100% fan and this do nothing... Link to comment Share on other sites More sharing options...
Pezhan Posted May 9, 2020 Author Share Posted May 9, 2020 Link to comment Share on other sites More sharing options...
Recommended Posts