sblantipodi

is there some expectations on when DDR5 will hit the market on desktops?

Isn't it the case to explain the differences between Vengeance pro and dominator Platinum once and for all on your official site? Why I should pay more for Dominator? Even now that I can easily find 8x8GB 3600c16 on vengeance pro and the fastest dominator is 3600c18?

The fact that you need "non Corsair adapters" to use non Corsair products says it all. All those Christmas effect that sincerely I really dislike needs to know how many led is connected to the devices, if you connect a third party device, can you specify how many led the device have in ique? Even if yes, I repeat, I can't uninstall the motherboard software, so really no need for another software from Corsair that adds Christmas effect and drain my wallet. I'm not buying Corsair products anymore just for this. No Corsair fans where I prefer them, no custom loop because of this RGB ecosystem. Hope that things will change in the future, that every manufacturer will use the common ws2812b and that this "non standard way of doing simple things" will stop.

I don't mean you, I mean corsair, sorry for my unpolite way :) in any case, I don't like the corsair ecosystem, I don't need all the christmas effect and I like the cheaper easyer way. it's only my hopinion but I think that many people will abandon corsair for this. it would be cool to know how many people prefer to spend more and be "less compatible with other products" for the added corsair's features and how many people agree with me.

very few people prefer christmas tree over simplicity. motherboard way is easyer, cheaper, and widely supported by many manufacturer. this are only my two cents, hope that you will stop with this nonsense or at least that you will offer the possibility to choose between your small ecosystem and the big one.

guys, corsair's way it's too complicated. you can't avoid using the "motherboard" software since all the motherboards now have RGB and it is not reasonable to have all corsair's products inside a case. corsair ique is the reason why I abandon corsair, I want a product that can be driven via the motherboard software and not having dozens of software to drive some rgb. hope that you will stop with this madness and start supporting the motherboard's software like all the others.

what is the adapter you are talking about? can't find it on your signature.

The problem isn't in the aura that breaks things is the problems is that Corsair wrote his own software without doing like everyone else. Support motherboard standards. This is the reason why I will not buy a Corsair product anymore. I want RGB but surely I don't want to be forced to use Corsair's only products

But isn't possible to sync up commander pro with Asus aura? What's the point in Corsair having it's own proprietary system that isn't able to sync up with others?

is it so hard to find? those brands are so widespread

we are still in the hypotesis area, hope to see some facts and some feedback from someone who done it. :) searching on the net it seems possible to sync ique with asus aura, so it could be possible. but how?

as far as I know Corsair is able to sync up external RGB even with devices connected to the mobo so I hope that someone more informed will shed some light on it.

Isn't it possible to connect the ek parts to the Asus motherboard and drive those parts with Corsair ique?

EK PE360 rads are 38mm, IMHO the best size for a rad for my use. in any case this don't want to be a thread EK vs Corsair I only want to know if I can sync EK RGB with Corsair RGB

Hi all, I would like to buy corsair hydro x series but the products feels too cheap and it is too expensive. Rads are too thin or too thick. I don't like the hydro x series at this moment. I have some special discounts on EK products so I would like to buy waterblocks from EK, reservoir from EK and put some corsair RGB fans. Is it possible to sync RGB between ek and corsair's products?

sorry, reading the guide, it seems very well made, thanks

thanks for the reply. if I connect 6 fans to the hub, where can I connect the 6 strips?

Hi all, I want to buy 6 ML120 PRO RGB. Should I need to buy 2 RGB lighting hub and Lighting Node PRO? Or 1 RGB lighting hub and a Lighting Node PRO is enough to drive 6 fans? Is there some guide on how to connect the RGB lighting hub and Lighting Node PRO? Why I need to have two "things" to drive a fan? How can I connect those things to my motherboard and to the fan? Can I use this things to drive even an RGB led strip for example? please answer all the question if possible. thanks

there are thousands of people with AX series PSU that suffer from abrupt shutdown. I had the same problem and there are hundred of threads of people having the same problem with the AX series. this problem happen on AX series only, it can't be anything else than a design flaw. Corsair admit it and recall our PSUs.