Chilli pepper

So, Posted question regarding the whole rgb thing going on with my cooler, and I have always noticed a 30c to 40c swing in temps at idle... So I started monitoring it closely because I can hear the pump surging... so I watching the telemetry the pump is falling to 0 rpm, and then spooling back to 1400 rpm every three seconds, so now when I put a load the cpu, it throttle almost instantly! If I keep the load going for 15 or 20 minutes my system completely flakes out and freezes up... when the cpu returns below 100c it starts recovering. I have already requested an rma, but I am wondering if the cooler is bricked because it has never worked as advertised? Open to any suggestion at this point. Thanks

So, I have uninstalled and reinstalled aio in another rig, and it has the same issue. I have tried every avenue I know of including turning fast boot off, and resetting power to get the block to reset. The commander sees the fans, but will not controll the rgb, however I do have control of speed!

Firmware is up to date, Icue see's the commander but not the aio, I can control pwm but not the rgb on the fans....

I have an Asus rog maximus hero z790, I-913900k, 128gig corsair vengence ddr5.... My problem is the display on the pump has never worked, and since the build, I have never had control of the rgb. I have rechecked, a dozen times and also rewired several more. I am certain I am wired correctly, actually its idiot proof, and I am an Idiot... 🙂 so I have control of pwm side, and i have control of the rgb for the ram, I have a total of ten sp120 elite fans, of those three are lit red, and 1 blue. no others are lit, and I cant change any color via software.