AskaLangly

Yes. K70 RGB TKL // M55 RGB PRO // VIRTUOSO SE LIGHTING NODE CORE // LL120 x3 // SP120 x3 VENGEANCE RGB PRO x4 // ST100 iCUE 5.3.102 // Win10 Pro for Workstations 22H2 I'm trying the Device Layouts function to see if it resets that way. Really wish the elgato iCUE plugin allowed to choose which layout to use, so that I can use one mural (half red, half black) to alter my RGB.

Meanwhile, my issue was when I first connected the K100 Air; Slipstream updates came about. Since then, my Virtuoso SE now has lower-pitched tones when turning it on and off. That's not the worst of it, as the firmware updates also broke the K100 Air's wireless functionality altogether.

FN-Enter.

The keyboard is on 5.11.74. I've already followed a ticket (#2005846045) that was in regards to one other issue with the Virtuoso SE that led to this. Posting here for exposure outside of reddit and Twitter. The firmware update screwed up the wireless radio on the keyboard itself. It attempts to use the radio when wired; the indicator for wireless glows yellow for a bit, but then goes away. ATTEMPTING TO USE FN + G-KEYS AT WIRED STATE WILL CAUSE THE KEYBOARD TO NOT OPERATE WIRED UNLESS UNPLUGGED. What about not tethered? Wireless just won't work. Tried power-on + escape combination... resets lighting and everything else, just not wireless. FN + NUM ROW for lighting will still work wirelessly. So you know, a wired connection won't allow UEFI BIOS operation at this point. If re-flashing firmware in Safe Mode isn't helping, I'm not sure what will. Maybe an updated firmware (Same-version Application AND Radio)?

I've been using three different profiles based on types of lighting and time of day. One of them has a custom EQ for the evening. I'd like to copy that EQ over to the other profiles, without having to remake the EQ over. Another option is to add an EQ Library, like with lighting.

I've set a custom EQ for a specific profile, but want to have a no-fuss copy of said EQ to a different profile. iCUE only currently copies the EQ to the same profile. Is there any way to implement this in the future? Thanks.

I used to rename my devices in iCUE 3.x, but can't seem to rename / restore them in 4.x.

iCUE ver.: 3.37.140 ST100 FW: 0.04.106 Virtuoso FWs: 0.17.149, 0.16.80 Hey. I'm trying to get audio out via a USB wired connection of the Virtuoso via the ST100. Wireless works fine (dongle in ST100), 3.5mm works okay, but I would just prefer to use USB mode while charging the headset. Since the ST100 is closest to me, I prefer using it as a hub. By the way, the USB mode on the Virtuoso works normally when connected to the front panel and the rear of the PC, audio and all. Only when connected to the ST100, does it have issues. I used to connect the ST100 to a PCI USB hub, thinking that would be causing issues. It didn't, but it's connected directly to the motherboard these days. Another thing is when I do this, I get errors from media players, saying there's no audio driver installed. This is XMPlay, by the way.