baz2011uk

i pre ordered my lcd upgrade and ship date advised 28 oct 23 then got email following day say 22 nov 2023 corsair what date is it?

currently the cable that powers the link hub it hub connector and 6 pin type 4 female that requires an extra cable to plug into psu will corsair bring out a cable that is hub to type 5 direct to psu will make a cleaner connection and lose the extra cable needed

i had this after the new windows update unplugging the dongle and plugging back in fixed my issue

not sure what mine was playing at left it on charge over night and its been fine so far

i get the same i have to force shut icue and reopen for it to show so it must be a bug as headphones still work got a new issue this evening headset was low battery so plugged in cable and carried on gaming and once i finished it started say low battery about 20 times in a row and icue didn't show it as charging i have switched it off and its flashing red for charging so see what happens tomorrow but if its playing up with charging its going back to amazon

you get a single 600mm cable with the fan starter kits and 2 cables with the AIO 1 x 100mm 90 degree both ends and 1 x 600mm 90 degree on 1 end my 10 fans inc AIO uses a total of 5 cables corsair are giving out free 1 x 100mm cable if you ask them there is an order form online work grabbing them mine arrived today in fact

i know corsair are sending out a 100mm straight to people that already own the starter kits for free as they plan to start shipping them with the kit so on my request i asked for 3 90 degree both ends as i ordered 3 kits and they was happy to provide it but they wont be shipping till sept time so i am happy to wait this was the white ones also

there is a 100mm 90 degree both end as the AIO come with one i used it in the scenario you mentioned above to bride my front 3 120's to my side 3 120's

and the rear went from 1 to the other need to tidy it more once i get the correct 90s tho

very happy with my LINK install i do require 2 x 90 degree cables at 100mm but need to wait for stock so using the longer cables and tucked them round the back for time being and will snap up the LCD upgrade once available

600mm cables with starter kit fans x1 600mm one side 90 degree x1 and 100mm 90 degree both ends comes with AIO anyone that has ordered the starter kit fans can order for free as 100mm cable and they will start shipping with them in i believe as of now Y splitter people who are building custom loops I'm guessing use the 90 degree end at fan entry to keep it lower profile makes it look cleaner in the case not very hard to really know tbh just a bit of common sense OOS cables is a problem but i believe it was a supplier issue not big deal they will be in stock sooner or later but you get plenty of cables to still build be it a little untidy until you can replace

im in the same boat need 2 100mm cables with 90 degree to tidy it up i run 3 front and 3 side XQ fans (this is on 1 side of the hub and to bridge it i used the AIO 10m cable with 2 90 degree end at the top i have the AIO and 3 fans on top i used the 600mm 90 degree from rad to other side of hub, this is where it gets untidy i then used a 600mm straight from the 2nd rad connection to the front fan on rad and placed the excess between the front and side fans it looks ok but not great (this needs a 100mm 90 degree both ends cable) at the last rad fan at the rear i used another 600mm straight from this fan to the final rear exhaust fan and placed the excess out the back again not that noticeable (but this needs a 100mm 90 degree both ends cable) so all in all to tidy it up i need 2 x 100mm 90 degree cables in white also when using the new H150I AIO link upon boot i got a bios warning no CPU connected but checking on icue it defo working then it dawned on my its not connected to the Mobo so i disabled the warning in bios Corsair should put this as a warning as not everyone will know this this has made the rear of my case so much cleaner and really like it just hoping someone makes a connector so i can feed my strimmer into the new hub now as i still have a commanded core XT installed just taking the feed from the lian li box to the XT box so it can work like an corsair product and it works very well would be alos nice to rid the commander core xt box now oh and the time warp lighting looks really good anyone have any ideas when the LCD upgrade will be available as i do miss it

I have done this today swapped out all 10 QL fans to the new XQ fans and still have a commanded core running the aio lcd part and a commanded core xt running 2 strimmers V2's in mobo mode but configured with icue and both are being seen and usable in icue still only issue i had was you cant plug the cable on the same side as the rad pipes its to tight but lucky the new box takes 2 feeds so i have 6 from front and top 3 and 1 rear on anther cable just waiting on shorter white cables to be in stock so at moment i am using the long ones that comes with the fans i have just ordered the h150i and plan to buy the lcd upgrade kit once released oh and the time warp mode for the fans is pretty cool not something i have seen before

wondering if anyone can help this is after a recent build 2 3 weeks ago i have 10 ql fans 2 commander cores connected to their own usb headers on a corsair usb hub front 3 and side 3 are connected to 1st CC plus a temp sensor 3 x aio and 1 rear plus lcd are plugged into the 2nd CC icue set up as dim white lighting on hardware green on software and this work as should but but when i first turn on i get the front and side fans go bright white for a second and ramp up the speed on the same fans the aio and rear is fine if i force shut icue hardware lighting kicks in as it should same as when shut down hardware lighting kicks in for a short time until pc fully shuts down its the bright white for a second only 6 fans and fan speed for the start-up that's thrown me i have gone over icue every setting and even deleted and re done them but no matter what it still does it i do have a video of it but grabbed screen shots should explain it just as well but can ling a video if its more helpful

Hi All After a little bit of help or confirmation on what i am thinking is possible I am planning to do a new build in the coming week or 2 and just received my 5000D airflow case I currently have 10 x QL fans 2 x commander cores so i was looking at doing 3 at the front intake 3 on the side intake replace the ML on the H150i to 3 x QL exhaust (i may put the 3 x ML on top as a pull also but that's for a later date) and i know QL's are not recommended for the rad but its been fine in my 4000d build for the past 24 months 1 on the rear exhaust my question is i have 2 x commander cores so is there any issue using 2 of theses at the same time i plan to put 1st commander core into USB on mobo header 1 and run 6 x fans RGB and 6 x PWM plus the LCD cooler plug 2nd commander core into a corsair powered 4 way USB HUB that's connected to USB mobo header 2 to run the remaining 4 x fan RGB and 4 x PWM and connect the cooler LCD USB also into the corsair powered 4 way USB or plug both commander cores into the corsair powered 4 way USB that's connected to the mobo USB header 1 and plug the USB cooler LCD screen into mobo USB header 2 (as i know there was issue with the Y splitter not sure on powered USB hubs but i think the NZXT helped a lot of people out (i also have an NZXT USB hub to hand also) i am looking for full RGB and PWM control within icue and believe the above should work but is it stable or could i see conflicts in icue? i do have 2 x lightning node core 1 x RGB LED fan hub and 1 6 x PWM corsair repeater that i don't think i will even need I'm hoping i don't really need to order more control units like the commander core Pro or XT due to have 2 x commander cores but if im missing something please advise and if i was to add the extra 3 ML fans for pull config on the rad at a later date i could just rig them up to the PWM repeater and plug into the 2nd commander core in one of the 2 remains PWM ports the RGB i wouldn't even plug in on them 3 fans