SinMaster Posted August 4, 2004 Share Posted August 4, 2004 I have twin sticks of PC-3200C2PT 512MB XMS Corsair Ram. I was running them quite sucessfully in my Asus A7N8X-X Mobo with an Athlon 2800 at 333MHz dual channel mode. I just upgraded my Mobo to an Abit IS7 with a P4 3.2GHz Northwood and a fresh load of Windows XP. Any recommendation on what my memory timings/Voltage should be? I've spent several hours so far and have yet to get this thing totally stable. Right now it's at 2-3-3-6 and 2.65V and it can surf the internet fine but it will client crash various games. That's where i left off last night. Thanks for your help. -Butch Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 4, 2004 Corsair Employee Share Posted August 4, 2004 Please set the Dim Voltage to 2.75 volts and set the timings to the tested settings for the modules you have! Or if you have 2 single modules the suggested settings would be Cass 2.5-3-3-7 and leave any performance setting set to Auto! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.