Jump to content
Corsair Community

Bad Ram


delta789

Recommended Posts

My computer constantly gives a "display driver has stopped and recovered error" so i tested every component and tested successfully, i finally tested the 2 sticks of ram together with memtest and got over 100errors, so i tested both sticks indiviudually and it passed the test and the other which completed with numerous errors, the error usual stated "Error Bits 000080" so i was wondering if this was the cause of the error and can i fix the ram or do i have to RMA
Link to comment
Share on other sites

  • Corsair Employees
The MB and CPU you have listed will only support DDR1333 and that would be what I would test them at. In addition the memory you have was made for and tested on and Intel Platform, you may need to set the memory Voltage to 1.65 Volts on this MB and CPU.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...