benwiggy Posted October 8, 2010 Share Posted October 8, 2010 Specs are in profile, cannot get system stable. Have tested with memtest. System is stable when using just 1 stick (either of them) Link to comment Share on other sites More sharing options...
trackrat Posted October 8, 2010 Share Posted October 8, 2010 Have you checked to see if the BIOS settings are 1333 MHz. with 9-9-9-24 2T ? If not you should try manually setting them. If the issue still exists you may want to reseat your CPU. Your CPU is rated to run memory at 1333 MHz. It may or may not run the memory overclocked to a higher frequency - per my signature. http://ark.intel.com/Product.aspx?id=41316 http://www.techreaction.net/2010/09/07/3-step-overclocking-guide-bloomfield-and-gulftown/ Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 8, 2010 Corsair Employee Share Posted October 8, 2010 I agree and please check that you have the latest BIOS they enable XMP Profile one and set the memory frequency at DDR1333 and see if its more stable. Link to comment Share on other sites More sharing options...
benwiggy Posted October 9, 2010 Author Share Posted October 9, 2010 Ok thanks guys - will follow your advice and see where that takes me... Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 11, 2010 Corsair Employee Share Posted October 11, 2010 NP Please let us know how it goes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.