Cotru Posted August 8, 2010 Share Posted August 8, 2010 I have been running a new build with the HX1000W for a few weeks and have it overclocked (Intel i7 930 @ 3800 on a Asus P6T). I would swear that when I first checked the voltages of the PSU through the bios they were reaching their amount but when I check them now after overclocking I get 3.26v for the 3.3v. Is this normal voltage when overclocking? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 9, 2010 Corsair Employee Share Posted August 9, 2010 Your 3.3v rail is still within ATX spec, its common for the rail to be a little higher or lower than its rating, but it must stay within 5% of the rating. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.