jtiger102 Posted August 4, 2010 Share Posted August 4, 2010 I started a build with the 700D yesterday and I have a question about how to mount an SSD to the drive trays. I see that there are screw holes on the bottom of the tray to line up with the SSD mounting holes. However, one of the alignment pins that is used to mount a 3.5 inch drive in the tray interferes with being able to align the SSD to the side of the tray. Is there something that I'm missing? Thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 4, 2010 Corsair Employee Share Posted August 4, 2010 You will need to remove the pins on the side that the SSD sits up against. To do this, just pop out the side locking mechanism and that should allow you to remove the pins. Snap the locking mechanism back into place and screw the drive down to the cradle and you should be good to go. Link to comment Share on other sites More sharing options...
jtiger102 Posted August 4, 2010 Author Share Posted August 4, 2010 Thanks! I'll give that a shot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.