BolducK Posted February 4, 2010 Share Posted February 4, 2010 Hello Per my system specs my system freeze usually within 5 minutes of boot. I have installed the latest bios and fresh install of Windows 7-64. I use all auto settings of bios. Can anyone help! Thank you Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 4, 2010 Corsair Employee Share Posted February 4, 2010 What is the Voltage that is printed on the label of those modules? And have you tested them one at a time with http://www.memtest.org? Link to comment Share on other sites More sharing options...
BolducK Posted February 5, 2010 Author Share Posted February 5, 2010 Thanks for your reply. 1.5v on th label. Memtest passed when I tested in the Gygabyte board but I have not tested in this new Asus. I will test and report back. Thank you Link to comment Share on other sites More sharing options...
BolducK Posted February 6, 2010 Author Share Posted February 6, 2010 I ran Memtest on each module for 16 hours There were no errors reported. I booted into Windows one module at a time and Windows froze within seconds. The first time I booted windows, it finished loading and then a non-stop very fast beep from the speakers. Second time with same stick froze right after load. 2nd stick froze right after load. What would be my next step? Thanks for your help. Link to comment Share on other sites More sharing options...
BolducK Posted February 10, 2010 Author Share Posted February 10, 2010 Is there some settings I can try? Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.