UPSDW Posted October 13, 2009 Share Posted October 13, 2009 Hi, i'm having a problem running the two corsair CM2X1024-8500C5D ver1.2 modules in dual channel mode. I can run either of the sticks on their own, providing perfect stability. But, when i up the dram voltage to 2.2V and insert the other memory module the system crashes within minutes. I'm a technical novice, unfamiliar with memory tests etc. Any suggestions on what the problem could be? Note: Before the system crashes, the display usually flickers with randomly placed pixel of green and red. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 15, 2009 Corsair Employee Share Posted October 15, 2009 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. But if you have the same problem with the new modules I would suggest getting the MB replaced. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.