Kaylani Posted October 3, 2009 Share Posted October 3, 2009 I have 2 pairs of TR3X6G1600C8D which occupy all 6 slots. Would it be okay to run them at 1333 or should I run them at 1066? Should I use 1.5 volts or something else? What about CPU VTT? I'm not sure what the guidelines are for 2 pairs of 6GB memory as opposed to 1 pair of 12 GB. I bought the pairs at the same time and it's too late to return them. I'll go through the exercise of testing with MemTest and Prime86 but I was hoping to get some recommendations so I know what to shoot for and have a starting point. Thanks for the help! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 5, 2009 Corsair Employees Share Posted October 5, 2009 Just load setup defaults and then enable XMP Profile one and then set the memory frequency at DDR1333 and test the system with http://www.memtest.org and the CPU VTT Voltage will depend on what core of CPU you have (D0 or C0) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.