AAffonso Posted June 26, 2009 Share Posted June 26, 2009 Hi, i'm new here, and sorry my bad english. My board is ECS GF8200A, is totally compatible with Corsair Twin2X4096-8500C5DF G, but is not running with 1066 Mhz just 800mhz. I can't configure my bios for 533Mhz. Below, my CPUZ and Everest reports: Memory SPD Information # 1 Size : 2,00 GB Memory Type : DDR2 Bandwidth : PC2-6400 Maximum Speed : 400,00 MHz Data Width : 64 Bit Module Slot : DIMM2 Manufacturer : Corsair Week / Year : 00 / 00 Part Number : CM2X2048-8500C5D Serial : 00524258 SPD # 1 : 270 MHz - 4 - 4 - 4 - 13 - 16 - 1,8 V SPD # 2 : 400 MHz - 5 - 5 - 5 - 18 - 23 - 1,8 V SPD # 3 : 534 MHz - 5 - 5 - 5 - 15 - 22 - 2,1 V Memory SPD Information # 2 Size : 2,00 GB Memory Type : DDR2 Bandwidth : PC2-6400 Maximum Speed : 400,00 MHz Data Width : 64 Bit Module Slot : DIMM3 Manufacturer : Corsair Week / Year : 00 / 00 Part Number : CM2X2048-8500C5D twin2x4096-8500c5df g Serial : 00524258 SPD # 4 : 270 MHz - 4 - 4 - 4 - 13 - 16 - 1,8 V SPD # 5 : 400 MHz - 5 - 5 - 5 - 18 - 23 - 1,8 V SPD # 6 : 534 MHz - 5 - 5 - 5 - 15 - 22 - 2,1 V Everest: DIMM3: Corsair Dominator CM2X2048-8500C5D ] Nome do módulo Corsair Dominator CM2X2048-8500C5D Número de série 00524258h (1480741376) Tamanho do módulo 2 GB (2 ranks, 8 banks) Tipo de módulo Unbuffered DIMM Tipo de memória DDR2 SDRAM Velocidade da memória DDR2-800 (400 MHz) Largura do módulo 64 bit Voltagem do módulo SSTL 1.8 Taxa de atualização Reduzido (7.8 us), Self-Refresh Temporização de Memória: @ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP) @ 270 MHz 4-4-4-13 (CL-RCD-RP-RAS) / 16-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP) Enhanced Performance Profile: Nome do perfil High Frequency Perfil de performance ótima Sim Velocidade da memória DDR2-1066 (533 MHz) Voltagem 2.1 V Temporização de Memória 5-5-5-15 (CL-RCD-RP-RAS) Row Cycle Time (tRC) 22T Command Rate (CR) 2T Write Recovery Time (tWR) 8T Recursos do módulo de memória: Analysis Probe Não presente FET Switch External Desativado Weak Driver Suportado DIMM4: Corsair Dominator CM2X2048-8500C5D ] Propriedades do módulo de memória: Nome do módulo Corsair Dominator CM2X2048-8500C5D Número de série 00524258h (1480741376) Tamanho do módulo 2 GB (2 ranks, 8 banks) Tipo de módulo Unbuffered DIMM Tipo de memória DDR2 SDRAM Velocidade da memória DDR2-800 (400 MHz) Largura do módulo 64 bit Voltagem do módulo SSTL 1.8 Taxa de atualização Reduzido (7.8 us), Self-Refresh @ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP) @ 270 MHz 4-4-4-13 (CL-RCD-RP-RAS) / 16-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP) Enhanced Performance Profile: Nome do perfil High Frequency Perfil de performance ótima Sim Velocidade da memória DDR2-1066 (533 MHz) Voltagem 2.1 V Temporização de Memória 5-5-5-15 (CL-RCD-RP-RAS) Row Cycle Time (tRC) 22T Command Rate (CR) 2T Write Recovery Time (tWR) 8T Analysis Probe Não presente FET Switch External Desativado Weak Driver Suportado Sorry my journal and tanks for your help, congratulations Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 26, 2009 Corsair Employee Share Posted June 26, 2009 I am sorry but with that MB and CPU the memory would have to be set to DD800 and the only way to run faster than DDR800 would be to over clock the CPU. Link to comment Share on other sites More sharing options...
AAffonso Posted June 30, 2009 Author Share Posted June 30, 2009 I am sorry but with that MB and CPU the memory would have to be set to DD800 and the only way to run faster than DDR800 would be to over clock the CPU. sorry, but I stay sick and only today I used the pc. very much tank you by his answer and now it is still clearer. I got in touch with the AMD suport and in order that 1066 had been it is necessary to have a HT of 3.0. and my 6000+ is HT 2.0. You are right, over clock the CPU, NOW, for Phenon II X4, Thank you, congratulations Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 30, 2009 Corsair Employee Share Posted June 30, 2009 NP Please let me know if you have any more questions! Link to comment Share on other sites More sharing options...
AAffonso Posted June 30, 2009 Author Share Posted June 30, 2009 No thank you, very very thank you, sorry, but when you mencioned my MB "I am sorry but with that MB" My MB acept 1066, HT 3.0 and with right processor work is fine in 1066, right? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 30, 2009 Corsair Employee Share Posted June 30, 2009 Yes with one set of modules and the right CPU it will support DDR1066. Link to comment Share on other sites More sharing options...
AAffonso Posted June 30, 2009 Author Share Posted June 30, 2009 YESSSSSS!!! Great. many many tks, if you closed this topic..... Alexandre Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 30, 2009 Corsair Employee Share Posted June 30, 2009 NP Please let me know if you have have any more questions! Link to comment Share on other sites More sharing options...
AAffonso Posted June 30, 2009 Author Share Posted June 30, 2009 No thank you, very very thank you, i haven't any questions Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 30, 2009 Corsair Employee Share Posted June 30, 2009 NP thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.